EUVIMEDEUVIMED entdecken
Crossref

Substrate-dependent growth of InSe thin films on sapphire and WS2/sapphire by molecular beam epitaxy

Soe Min Htet, Sheng-Wei Hsiao, Chun-Yu Kuo, Chia-Hsing Wu, Yen-Teng Ho, Chao-An Jong, Sheng-Rui Jian, Chu-Shou Yang

Journal of Vacuum Science & Technology A · 01.01.2027 · 45 (1)

DOI: 10.1116/6.0005817 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Vacuum Science & Technology A, online erschienen am 18.11.2026. Verfasst von Soe Min Htet und 7 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Achieving high-quality, large-area InSe thin films remains a significant challenge for the development of next-generation electronic and optoelectronic devices. In this work, the substrate-dependent growth behavior of γ-InSe thin films on the c-plane sapphire with/without WS2 substrates were systematically investigated using molecular beam epitaxy. The influence of the substrate interface on the structural evolution of InSe was examined through growth-time-dependent studies with deposition durations of 30, 60, and 120 min under identical growth conditions at 400 °C. Raman spectroscopy confirmed the formation of layered γ-InSe on both substrates, while films grown on the sapphire with/without WS2 substrates exhibited stronger phonon intensities and narrower Raman peaks, indicating improved crystal quality. X-ray diffraction measurements revealed preferential c axis-oriented γ-InSe growth for all samples, with diffraction peaks becoming progressively stronger and sharper as the growth time increased. Field-emission scanning electron microscopy further demonstrated that InSe films grown on the sapphire with/without WS2 substrates possessed more continuous layered domains, improved surface crystalline, and a more uniform morphology than those grown directly on sapphire. The enhanced structural quality is attributed to the van der Waals surface of the WS2 interlayer, which provides a favorable growth surface for the nucleation and structural evolution of layered InSe while minimizing unfavorable interactions with the underlying sapphire during the initial stages of deposition. These results demonstrate that introducing a WS2 interlayer effectively improves the structural evolution and crystalline quality of γ-InSe thin films, providing valuable insight into substrate-enhanced controlled preferential ordering growth on van der Waals buffer layers and a practical strategy for the vacuum-based synthesis of high-quality layered chalcogenide semiconductors.

Zitieren

APA

Htet, S. M., Hsiao, S., Kuo, C., Wu, C., Ho, Y., Jong, C., Jian, S., & Yang, C. (2027). Substrate-dependent growth of InSe thin films on sapphire and WS2/sapphire by molecular beam epitaxy. Journal of Vacuum Science & Technology A, 45(1). https://doi.org/10.1116/6.0005817

Vancouver

Htet SM, Hsiao S, Kuo C, Wu C, Ho Y, Jong C, et al. Substrate-dependent growth of InSe thin films on sapphire and WS2/sapphire by molecular beam epitaxy. Journal of Vacuum Science & Technology A. 2027;45(1). doi:10.1116/6.0005817

BibTeX
@article{Htet2027,
  author = {Htet, Soe Min and Hsiao, Sheng-Wei and Kuo, Chun-Yu and Wu, Chia-Hsing and Ho, Yen-Teng and Jong, Chao-An and Jian, Sheng-Rui and Yang, Chu-Shou},
  title = {Substrate-dependent growth of InSe thin films on sapphire and WS2/sapphire by molecular beam epitaxy},
  journal = {Journal of Vacuum Science & Technology A},
  year = {2027},
  volume = {45},
  number = {1},
  doi = {10.1116/6.0005817}
}
Kostenlos starten →