EUVIMEDEUVIMED entdecken
Crossref

Surface morphology and oxide phases of Cu pads in vias under thermal annealing in air

Ranjitha Kumarapuram Hariharalakshmanan, Weichang Lin, Nick Polomoff, Roy Yu, Katsuyuki Sakuma, Yechuan Chen, Chao Yang, Katharine Dovidenko, James Lu, Toh-Ming Lu, Gwo-Ching Wang

Journal of Vacuum Science & Technology B · 01.09.2026 · 44 (5)

DOI: 10.1116/6.0005605 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Vacuum Science & Technology B, online erschienen am 31.07.2026. Verfasst von Ranjitha Kumarapuram Hariharalakshmanan und 10 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Gefördert von: IBM-RPI Future of Computing Research Collaboration.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Thermal annealing of Cu, including oxidation and grain growth, plays a crucial role in the reliability performance of microelectronic devices. We present an experimental analysis of Cu oxide growth in dielectric-confined Cu pads in vias, essential for the development of a reliable Cu/oxide hybrid bonding process. Thermal oxidation of Cu pads grown by electroplating and processed by dual damascene was performed at a fixed annealing temperature (Ta) from 200 to 350 °C for 30 min under ambient air. As the temperature increases, the Cu pad expands and bulges above the dielectric surface. The surface morphology and roughness of Cu pad were examined by atomic force microscopy. The evolution of Cu oxide phases versus Ta was examined by Raman spectroscopy. At low Ta, the Cu2O phase dominates. As Ta increases, the CuO phase appears at 250 °C and coexists with the Cu2O phase. The energy dispersive x-ray spectroscopy shows that Cu oxide phases exist in the bulged-out Cu pad and can be detached from the unoxidized part of the Cu pad beneath the dielectric surface. The focused ion beam cross sections of Cu pads show a boundary region with gaps and void between oxidized Cu and unoxidized Cu pads. This understanding is relevant for the reliability of hybrid bonding in microelectronic Cu interconnects.

Förderung

  • IBM-RPI Future of Computing Research Collaboration

Zitieren

APA

Hariharalakshmanan, R. K., Lin, W., Polomoff, N., Yu, R., Sakuma, K., Chen, Y., Yang, C., Dovidenko, K., Lu, J., Lu, T., & Wang, G. (2026). Surface morphology and oxide phases of Cu pads in vias under thermal annealing in air. Journal of Vacuum Science & Technology B, 44(5). https://doi.org/10.1116/6.0005605

Vancouver

Hariharalakshmanan RK, Lin W, Polomoff N, Yu R, Sakuma K, Chen Y, et al. Surface morphology and oxide phases of Cu pads in vias under thermal annealing in air. Journal of Vacuum Science & Technology B. 2026;44(5). doi:10.1116/6.0005605

BibTeX
@article{Hariharalakshmanan2026,
  author = {Hariharalakshmanan, Ranjitha Kumarapuram and Lin, Weichang and Polomoff, Nick and Yu, Roy and Sakuma, Katsuyuki and Chen, Yechuan and Yang, Chao and Dovidenko, Katharine and Lu, James and Lu, Toh-Ming and Wang, Gwo-Ching},
  title = {Surface morphology and oxide phases of Cu pads in vias under thermal annealing in air},
  journal = {Journal of Vacuum Science & Technology B},
  year = {2026},
  volume = {44},
  number = {5},
  doi = {10.1116/6.0005605}
}
Kostenlos starten →