Study on the microstructural evolution and adhesion of copper coating on stainless steel foil during annealing
Journal of Vacuum Science & Technology A · 01.09.2026 · 44 (5)
DOI: 10.1116/6.0005475 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Vacuum Science & Technology A, online erschienen am 06.08.2026. Verfasst von Jingwei Zhao und 7 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
In this work, the nanoscale copper coating was successfully fabricated on the 301 stainless steel foil via direct current magnetron sputtering technology. The microstructural evolution and adhesion of copper coatings during annealing were analyzed, and the mechanical behavior and formability of the coated material were systematically studied. The results showed that the diffusion of both Fe and Cu elements at the interface remarkably increases with the increase in holding time, while interfacial bonding improves simultaneously. When the maximum holding time is up to 120 min, enhanced plasticity of the coated material can be achieved owing to the increased twin density, decreased geometrically necessary dislocation density, and preference orientation of Cu grains toward. Compared with the magnetron-sputtered material without annealing, prolonged annealing at 500 °C facilitates the elimination of columnar grains, increased elemental interdiffusion at the interface, and the formation of high-density twin boundaries, thereby enhancing the plasticity and adhesion of the coated material.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Zhao, J., He, K., Zhao, W., Ma, X., Jiang, Z., Rudenkov, A. S., Liao, X., & Liu, Z. (2026). Study on the microstructural evolution and adhesion of copper coating on stainless steel foil during annealing. Journal of Vacuum Science & Technology A, 44(5). https://doi.org/10.1116/6.0005475
Vancouver
Zhao J, He K, Zhao W, Ma X, Jiang Z, Rudenkov AS, et al. Study on the microstructural evolution and adhesion of copper coating on stainless steel foil during annealing. Journal of Vacuum Science & Technology A. 2026;44(5). doi:10.1116/6.0005475
BibTeX
@article{Zhao2026,
author = {Zhao, Jingwei and He, Kunbin and Zhao, Weidong and Ma, Xiaoguang and Jiang, Zhengyi and Rudenkov, Alexander Sergeevich and Liao, Xi and Liu, Zhubo},
title = {Study on the microstructural evolution and adhesion of copper coating on stainless steel foil during annealing},
journal = {Journal of Vacuum Science & Technology A},
year = {2026},
volume = {44},
number = {5},
doi = {10.1116/6.0005475}
}
EUVIMED