EUVIMEDEUVIMED entdecken
Crossref

Pulsed radio frequency power modulation for profile control in cryogenic reactive ion etching of silicon gratings

Zhitian Shi, Ming Lu, Nikhil Tiwale, Chang-Yong Nam

Journal of Vacuum Science & Technology A · 01.07.2026 · 44 (4)

DOI: 10.1116/6.0005399 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Vacuum Science & Technology A, online erschienen am 16.06.2026. Verfasst von Zhitian Shi und 3 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Gefördert von: U.S. Department of Energy, Brookhaven National Laboratory, Ministry of Trade, Industry and Energy.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cryogenic silicon etching with SF6/O2 plasmas enables vertical sidewalls and smooth surfaces for high–aspect-ratio structures, yet precise control of etched profiles (sidewall angle, lateral etching, and linewidth retention) remains challenging under continuous-wave excitation due to coupling among radical fluxes, ion energy distributions, and in situ passivation dynamics. Here, we investigated pulsed radio frequency bias delivery as a process knob for profile control during cryogenic silicon etching. Systematic experiments on 500 nm-wide, 1 μm-pitch gratings etched to 0.8–1.1 μm depth at 0.5–2 kHz pulsing frequency and 25%–75% duty cycle revealed strong dependencies of etch rate, linewidth, and sidewall angle on modulation conditions. We proposed a conceptual kinetic picture combined with feature-scale electrostatic analysis to understand the alternation of ion-driven etching and passivation recovery between on/off segments and local electric field shaping and modulation of ion trajectories within the trench. Moderate duty cycles (50%–75%) near 1 kHz achieved a balance between anisotropy and etch rate. These results demonstrate pulsed-bias modulation can be utilized to tune directionality and sidewall preservation in cryogenic SF6/O2 etching, which are relevant to photonic, metrology, and quantum device fabrication.

Förderung

  • U.S. Department of Energy
  • Brookhaven National Laboratory
  • Ministry of Trade, Industry and Energy

Zitieren

APA

Shi, Z., Lu, M., Tiwale, N., & Nam, C. (2026). Pulsed radio frequency power modulation for profile control in cryogenic reactive ion etching of silicon gratings. Journal of Vacuum Science & Technology A, 44(4). https://doi.org/10.1116/6.0005399

Vancouver

Shi Z, Lu M, Tiwale N, Nam C. Pulsed radio frequency power modulation for profile control in cryogenic reactive ion etching of silicon gratings. Journal of Vacuum Science & Technology A. 2026;44(4). doi:10.1116/6.0005399

BibTeX
@article{Shi2026,
  author = {Shi, Zhitian and Lu, Ming and Tiwale, Nikhil and Nam, Chang-Yong},
  title = {Pulsed radio frequency power modulation for profile control in cryogenic reactive ion etching of silicon gratings},
  journal = {Journal of Vacuum Science & Technology A},
  year = {2026},
  volume = {44},
  number = {4},
  doi = {10.1116/6.0005399}
}
Kostenlos starten →