EUVIMEDEUVIMED entdecken
Crossref

Corrosion behavior of sealant-treated Fe-based amorphous coatings in simulated desulfurization acidic environments

Chunyan Li, Yunlong Tang, Guoning Quan, Xin Yu, Shuyan Zhang, Xinhua Wang, Xiaocheng Li, Shengzhong Kou

Journal of Vacuum Science & Technology A · 01.05.2026 · 44 (3)

DOI: 10.1116/6.0005397 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Vacuum Science & Technology A, online erschienen am 30.04.2026. Verfasst von Chunyan Li und 7 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fe-based amorphous alloy coatings were successfully deposited on the surface of Q235 steel using high-velocity oxygen-fuel spraying technology. The Fe-based amorphous coatings were sealed using epoxy resin, polytetrafluoroethylene (PTFE) resin, SiO2 sol, and aluminum phosphate. The four types of coatings were compared to investigate the corrosion performance of the sealed coatings in a 5 wt. % H2SO4 solution, and the corrosion protection failure mechanisms of the coatings before and after sealing were analyzed. Corrosion tests were conducted on the specimens using an electrochemical workstation, and the corrosion products and corrosion morphology of the coatings were analyzed and observed. The sealing effects of the four sealing agents—epoxy resin, PTFE resin, SiO2 sol, and aluminum phosphate—were systematically compared, and the variation in the performance of the optimal sealing coating with respect to the concentration of the corrosive medium was thoroughly investigated. The results indicate that coatings sealed with aluminum phosphate exhibit the best corrosion resistance in H2SO4 solutions; however, as the concentration of H2SO4 increases, the effectiveness of the sealing agent in enhancing the coating’s corrosion resistance gradually decreases. This work provides useful insights for improving the corrosion resistance of Fe-based amorphous coatings, thus facilitating their potential application in more demanding environments.

Zitieren

APA

Li, C., Tang, Y., Quan, G., Yu, X., Zhang, S., Wang, X., Li, X., & Kou, S. (2026). Corrosion behavior of sealant-treated Fe-based amorphous coatings in simulated desulfurization acidic environments. Journal of Vacuum Science & Technology A, 44(3). https://doi.org/10.1116/6.0005397

Vancouver

Li C, Tang Y, Quan G, Yu X, Zhang S, Wang X, et al. Corrosion behavior of sealant-treated Fe-based amorphous coatings in simulated desulfurization acidic environments. Journal of Vacuum Science & Technology A. 2026;44(3). doi:10.1116/6.0005397

BibTeX
@article{Li2026,
  author = {Li, Chunyan and Tang, Yunlong and Quan, Guoning and Yu, Xin and Zhang, Shuyan and Wang, Xinhua and Li, Xiaocheng and Kou, Shengzhong},
  title = {Corrosion behavior of sealant-treated Fe-based amorphous coatings in simulated desulfurization acidic environments},
  journal = {Journal of Vacuum Science & Technology A},
  year = {2026},
  volume = {44},
  number = {3},
  doi = {10.1116/6.0005397}
}
Kostenlos starten →