Metrology of ultrathin iron catalyst films by spectroscopic ellipsometry
Journal of Vacuum Science & Technology A · 01.07.2026 · 44 (4)
DOI: 10.1116/6.0005371 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Vacuum Science & Technology A, online erschienen am 20.05.2026. Verfasst von Nicholas E. Allen und 4 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Gefördert von: Tula Health, Octavian Solutions, Brigham Young University (BYU) High Impact Doctoral Research Assistantship.
Abstract (Originalsprache)
Vertically aligned carbon nanotube forest growth uses a thin-film iron catalyst on an alumina support. The iron catalyst thickness (typically, 1–10 nm) strongly affects forest morphology. We explored the use of spectroscopic ellipsometry (SE) as a rapid, sensitive, and nondestructive metrology method for these films. SE does have challenges, however, as it is difficult to break the correlation in the analysis between fitted optical constants and thickness of ultrathin films. Partial oxidation and optical absorption in the iron–iron oxide films add further complexity. We performed a multisample SE analysis of thermally evaporated iron films with target thicknesses of 1–14 nm. To improve sensitivity, we used interference enhancement by incorporating a 350 nm silica film on a silicon substrate beneath the iron film and alumina support. We used a consecutive-layer approach, collecting SE data and fitting the optical constants and thickness of each film before depositing the next. The iron–iron oxide film was modeled with an effective medium approximation layer. The model fit the data well with a mean squared error of 25. From the SE results, we estimated the thickness of the iron film before oxidation (“equivalent iron thickness”). We found that SE is highly sensitive to equivalent iron thickness and yields repeatable thickness measurements (ca. ±0.015 nm). We determined that the equivalent iron thickness variation we observed across different measurement locations on the same sample can be explained by error propagation from uncertainty in the underlying alumina thickness.
Förderung
- Tula Health
- Octavian Solutions
- Brigham Young University (BYU) High Impact Doctoral Research Assistantship
- Copley Graduate Student Scholarship
- BYU Physics and Astronomy Department
Zitieren
APA
Allen, N. E., Linford, M. R., Allred, D. D., Vanfleet, R. R., & Davis, R. C. (2026). Metrology of ultrathin iron catalyst films by spectroscopic ellipsometry. Journal of Vacuum Science & Technology A, 44(4). https://doi.org/10.1116/6.0005371
Vancouver
Allen NE, Linford MR, Allred DD, Vanfleet RR, Davis RC. Metrology of ultrathin iron catalyst films by spectroscopic ellipsometry. Journal of Vacuum Science & Technology A. 2026;44(4). doi:10.1116/6.0005371
BibTeX
@article{Allen2026,
author = {Allen, Nicholas E. and Linford, Matthew R. and Allred, David D. and Vanfleet, Richard R. and Davis, Robert C.},
title = {Metrology of ultrathin iron catalyst films by spectroscopic ellipsometry},
journal = {Journal of Vacuum Science & Technology A},
year = {2026},
volume = {44},
number = {4},
doi = {10.1116/6.0005371}
}
EUVIMED