EUVIMEDEUVIMED entdecken
Crossref

Electron beam generated ion-ion plasmas produced in Ar/SF6 and Ar/NF3 mixtures for plasma anodization

David R. Boris, Michael J. Johnson, Virginia D. Wheeler, Maria Gabriela Sales, Luis V. Rodriguez de Marcos, Edward J. Wollack, Manuel A. Quijada, Scott G. Walton

Journal of Vacuum Science & Technology A · 01.01.2026 · 44 (1)

DOI: 10.1116/6.0004993 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Vacuum Science & Technology A, online erschienen am 15.12.2025. Verfasst von David R. Boris und 7 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 32 Literaturangaben. Gefördert von: Astrophysics Science Division, Office of Naval Research, National Research Council.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this work, electron beam generated plasmas in Ar/SF6 and Ar/NF3 mixtures are used to form ion-ion plasmas from which one can extract F− ions. These negative ions are used to controllably fluorinate the surface of an aluminum substrate with nanoscale precision. To understand this process, the ion-ion plasmas are characterized with Langmuir probes and optical emission spectroscopy, and the resulting AlF3 layer is characterized using in situ spectroscopic ellipsometry and ex situ x-ray photoelectron spectroscopy with depth profiling. This combination of plasma and material characterization indicates that the fluoride layer formation process is similar to plasma anodization. Here, the flux of negative ions delivered to the surface combined with an applied bias that promotes the migration of F− ions into the substrate where they react to form AlF3, enabling the growth of thick fluoride layers. The minimum thickness of the resulting AlF3 layer is determined by the thickness of the resident native oxide layer on the aluminum surface, as the conversion of this layer from oxide to fluoride is necessary for the production of stoichiometric AlF3 films. It is found that converting the native oxide layer into a fluoride results in an expansion of the surface passivation layer thickness by about a factor of 2. It is also found that NF3 produces significantly higher densities of atomic F and F− compared to SF6, leading to more rapid growth of the AlF3 layer.

Förderung

  • Astrophysics Science Division
  • Office of Naval Research
  • National Research Council

Zitieren

APA

Boris, D. R., Johnson, M. J., Wheeler, V. D., Sales, M. G., Marcos, L. V. R. D., Wollack, E. J., Quijada, M. A., & Walton, S. G. (2026). Electron beam generated ion-ion plasmas produced in Ar/SF6 and Ar/NF3 mixtures for plasma anodization. Journal of Vacuum Science & Technology A, 44(1). https://doi.org/10.1116/6.0004993

Vancouver

Boris DR, Johnson MJ, Wheeler VD, Sales MG, Marcos LVRD, Wollack EJ, et al. Electron beam generated ion-ion plasmas produced in Ar/SF6 and Ar/NF3 mixtures for plasma anodization. Journal of Vacuum Science & Technology A. 2026;44(1). doi:10.1116/6.0004993

BibTeX
@article{Boris2026,
  author = {Boris, David R. and Johnson, Michael J. and Wheeler, Virginia D. and Sales, Maria Gabriela and Marcos, Luis V. Rodriguez de and Wollack, Edward J. and Quijada, Manuel A. and Walton, Scott G.},
  title = {Electron beam generated ion-ion plasmas produced in Ar/SF6 and Ar/NF3 mixtures for plasma anodization},
  journal = {Journal of Vacuum Science & Technology A},
  year = {2026},
  volume = {44},
  number = {1},
  doi = {10.1116/6.0004993}
}
Kostenlos starten →