EUVIMEDEUVIMED entdecken
Crossref

Finding a plasma copolymerization fit that is “just right” using pentane and acrylic acid precursors

Alexzandria Ledezma, Mollie Corbett iD, Bethany Yashkus iD, Mackenzie Jackson iD, Kristina D Closser iD, Joshua M Blechle iD, Morgan J Hawker iD

Biointerphases · 01.09.2025 · 20 (5)

DOI: 10.1116/6.0004873 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biointerphases, online erschienen am 09.10.2025. Verfasst von Alexzandria Ledezma und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry and Biochemistry, California State University, Fresno, California 93710. Hauptthemen laut MEDLINE: Acrylates, Polymerization, Plasma Gases, Coated Materials, Biocompatible. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 75 Literaturangaben. Gefördert von: NIGMS NIH HHS, National Institutes of Health, Office of Advanced Cyberinfrastructure.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Plasma-enhanced chemical vapor deposition is a versatile technology to control interactions at the biomaterial/biological environment interface. Plasma copolymerization is a related strategy that utilizes a mixed feedgas of two or more plasma precursors, whereby conformal coating surface properties can be controlled by simply varying the feedgas composition. This study reports a previously unexplored combination of plasma precursors—pentane and acrylic acid—to deposit coatings with tunable chemistry and wettability on silk fibroin constructs. Five pentane/acrylic acid feedgas compositions were utilized, ranging from 100%, 75%, 50%, 25%, to 0% pentane by pressure. Plasma-deposited coating properties were evaluated through water contact angle goniometry and x-ray photoelectron spectroscopy. Coating static water contact angle values were tunable between >90° and <55° depending on the feedgas composition. Plasma diagnostics and density functional theory were used to evaluate plasma precursor fragmentation. This library of plasma-modified silk-based materials can be used to design biomaterial surfaces that are “just right” for the intended biomedical setting.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

AcrylatesPolymerizationPlasma GasesCoated Materials, BiocompatibleSurface PropertiesWettabilityPhotoelectron SpectroscopyFibroins

Substanzen

acrylic acidAcrylatesPlasma GasesFibroinsCoated Materials, Biocompatible

Autor:innen und Institutionen

  • Department of Chemistry and Biochemistry, California State University, Fresno, California 93710.
  • Department of Chemistry and Biochemistry, Wilkes University, Wilkes-Barre, Pennsylvania 18766.

ORCID-Profile: Mollie Corbett, Bethany Yashkus, Mackenzie Jackson, Kristina D Closser, Joshua M Blechle, Morgan J Hawker

Förderung

  • NIGMS NIH HHS
  • National Institutes of Health
  • Office of Advanced Cyberinfrastructure

Zitieren

APA

Ledezma, A., Corbett, M., Yashkus, B., Jackson, M., Closser, K. D., Blechle, J. M., & Hawker, M. J. (2025). Finding a plasma copolymerization fit that is “just right” using pentane and acrylic acid precursors. Biointerphases, 20(5). https://doi.org/10.1116/6.0004873

Vancouver

Ledezma A, Corbett M, Yashkus B, Jackson M, Closser KD, Blechle JM, et al. Finding a plasma copolymerization fit that is “just right” using pentane and acrylic acid precursors. Biointerphases. 2025;20(5). doi:10.1116/6.0004873

BibTeX
@article{Ledezma2025,
  author = {Ledezma, Alexzandria and Corbett, Mollie and Yashkus, Bethany and Jackson, Mackenzie and Closser, Kristina D and Blechle, Joshua M and Hawker, Morgan J},
  title = {Finding a plasma copolymerization fit that is “just right” using pentane and acrylic acid precursors},
  journal = {Biointerphases},
  year = {2025},
  volume = {20},
  number = {5},
  doi = {10.1116/6.0004873}
}
Kostenlos starten →