Effect of growth temperature on the microstructure and properties of epitaxial MoS2 monolayers grown by metalorganic chemical vapor deposition
Journal of Vacuum Science & Technology A · 01.03.2024 · 42 (2)
DOI: 10.1116/6.0003296 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Vacuum Science & Technology A, online erschienen am 02.02.2024. Verfasst von Chen Chen und 21 weiteren Autor:innen. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 29 Literaturangaben. Gefördert von: National Science Foundation, German Research Foundation, National Science Centre, Poland.
Abstract (Originalsprache)
Metalorganic chemical vapor deposition (MOCVD) is a promising technique for wafer-scale synthesis of MoS2 monolayers for 2D field-effect transistors (2D-FETs) and related devices. Epitaxial growth of MoS2 on sapphire provides films that are crystallographically well-oriented but typically contain low-angle grain boundaries (e.g., mirror twins), voids, and other defects depending on growth conditions and substrate characteristics. In this study, we investigate microstructure, optical properties, and field-effect characteristics of wafer-scale MoS2 monolayers grown by MOCVD on c-plane sapphire over a narrow window of growth temperatures (900–1000 °C). The density of low-angle grain boundaries in the MoS2 monolayer was found to decrease dramatically from 50% areal coverage for films grown at 900 °C to 5% at 1000 °C. This decrease in low-angle grain boundary density is correlated with an increase in the room-temperature photoluminescence intensity of A excitons and a decrease in the full-width-half maximum (FWHM) of the Raman A1g peak, which are typically indicative of a general reduction in defects in MoS2. However, the best transport properties (e.g., mean field-effect mobility mFE = 17.3 cm2/V s) were obtained in MoS2 monolayers grown at an intermediate temperature of 950 °C. It was found that as the growth temperature increased, small regions bound by high-angle boundaries begin to appear within the monolayer and increase in areal coverage, from ∼2% at 900 °C to ∼5% at 950 °C to ∼10% at 1000 °C. The growth temperature of 950 °C, therefore, provides an intermediate condition where the combined effects of low-angle and high-angle boundaries are minimized. The results of this study provide guidance on MOCVD growth and characterization that can be used to further optimize the performance of MoS2 2D-FETs.
Förderung
- National Science Foundation
- German Research Foundation
- National Science Centre, Poland
- Polsko-Amerykanska Komisja Fulbrighta
- National Aeronautics and Space Administration
- U.S. Air Office of Scientific Research and Clarkson Aerospace Corp.
Zitieren
APA
Chen, C., Trainor, N., Kumari, S., Myja, H., Kümmell, T., Zhang, Z., Zhang, Y., Bisht, A., Sadaf, M. U. K., Sakib, N. U., Han, Y., Knight, T. V. M., Graves, A. R., Leger, M. E., Redwing, N. D., Kim, M., Kowalczyk, D. A., Bacher, G., Alem, N., …, & Redwing, J. M. (2024). Effect of growth temperature on the microstructure and properties of epitaxial MoS2 monolayers grown by metalorganic chemical vapor deposition. Journal of Vacuum Science & Technology A, 42(2). https://doi.org/10.1116/6.0003296
Vancouver
Chen C, Trainor N, Kumari S, Myja H, Kümmell T, Zhang Z, et al. Effect of growth temperature on the microstructure and properties of epitaxial MoS2 monolayers grown by metalorganic chemical vapor deposition. Journal of Vacuum Science & Technology A. 2024;42(2). doi:10.1116/6.0003296
BibTeX
@article{Chen2024,
author = {Chen, Chen and Trainor, Nicholas and Kumari, Shalini and Myja, Henrik and Kümmell, Tilmar and Zhang, Zhiyu and Zhang, Yuxi and Bisht, Anuj and Sadaf, Muhtasim Ul Karim and Sakib, Najam U. and Han, Ying and Knight, Thomas V. Mc and Graves, Andrew R. and Leger, Meghan E. and Redwing, Nicholas D. and Kim, Myeongok and Kowalczyk, Dorota Anna and Bacher, Gerd and Alem, Nasim and Yang, Yang and Das, Saptarshi and Redwing, Joan M.},
title = {Effect of growth temperature on the microstructure and properties of epitaxial MoS2 monolayers grown by metalorganic chemical vapor deposition},
journal = {Journal of Vacuum Science & Technology A},
year = {2024},
volume = {42},
number = {2},
doi = {10.1116/6.0003296}
}
EUVIMED