EUVIMEDEUVIMED entdecken
Crossref

Heat transfer mechanism of electrostatic chuck surface and wafer backside to improve wafer temperature uniformity

Tae Woong Yoon, Sung Il Cho, Minsuk Choi, Sang Jeen Hong

Journal of Vacuum Science & Technology B · 01.07.2023 · 41 (4)

DOI: 10.1116/6.0002737 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Vacuum Science & Technology B, online erschienen am 26.05.2023. Verfasst von Tae Woong Yoon und 3 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 26 Literaturangaben. Gefördert von: Korea Institute for Advancement of Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Semiconductor manufacturing technology keeps toward scaling down to a few nanometers. To protect the process yield and achieve the success of chip manufacturing, the center-to-edge uniformity of the wafer's temperature has become a crucial parameter. The thermal characteristics of the wafer are dominantly affected by the electrostatic chuck, which is generally used to support the wafer in the manufacturing process. In particular, the backside gas, which passes through the interface between the wafer and electrostatic chuck, is important for cooling the wafer below a critical temperature. The heat transfer via a backside gas can be explained by the layer-bulk model, and its pressure is a key factor to determine the cooling effectiveness. In this paper, a one-dimensional thermal circuit model is established for a system including the wafer, electrostatic chuck, and backside gas to calculate the convective heat transfer coefficient caused by the backside gas. The numerical results showed that the uniformity of the wafer's temperature became worse as the backside gas pressure increased in a low-pressure range but significantly improved above a critical value of the gas pressure. Based on our findings, we concluded that the backside gas pressure should be optimized to improve the uniformity of the wafer temperature.

Förderung

  • Korea Institute for Advancement of Technology

Zitieren

APA

Yoon, T. W., Cho, S. I., Choi, M., & Hong, S. J. (2023). Heat transfer mechanism of electrostatic chuck surface and wafer backside to improve wafer temperature uniformity. Journal of Vacuum Science & Technology B, 41(4). https://doi.org/10.1116/6.0002737

Vancouver

Yoon TW, Cho SI, Choi M, Hong SJ. Heat transfer mechanism of electrostatic chuck surface and wafer backside to improve wafer temperature uniformity. Journal of Vacuum Science & Technology B. 2023;41(4). doi:10.1116/6.0002737

BibTeX
@article{Yoon2023,
  author = {Yoon, Tae Woong and Cho, Sung Il and Choi, Minsuk and Hong, Sang Jeen},
  title = {Heat transfer mechanism of electrostatic chuck surface and wafer backside to improve wafer temperature uniformity},
  journal = {Journal of Vacuum Science & Technology B},
  year = {2023},
  volume = {41},
  number = {4},
  doi = {10.1116/6.0002737}
}
Kostenlos starten →