EUVIMEDEUVIMED entdecken
Crossref

Role of dose optimization in Ru atomic layer deposition for low resistivity films

Victor Wang, Michael Breeden, Nickolas Ashburn, Matthew Bergschneider, Jacob Spiegelman, Harsono Simka, Kyeongjae Cho, Andrew C. Kummel

Journal of Vacuum Science & Technology B · 01.01.2023 · 41 (1)

DOI: 10.1116/6.0002153 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Vacuum Science & Technology B, online erschienen am 13.12.2022. Verfasst von Victor Wang und 7 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 67 Literaturangaben. Gefördert von: Semiconductor Research Corporation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ruthenium (Ru) is an alternative to copper (Cu) and cobalt (Co) interconnect layers in sub 20 nm features due to its low resistivity in scaled wires and low diffusion into porous low-K dielectrics (SiCOH). Two goals for a successful Ru atomic layer deposition (ALD) process are to enable films with resistivity values as close as possible to that of bulk Ru and to enable selective deposition to achieve bottom-up fill of vias. In this work, the effects of dose variation on resistivity and selectivity of the Ru ALD process using a dicarbonyl-bis(5-methyl-2, 4-hexanediketonato) Ru(II) precursor, Ru(IHD)2(CO)2 (“Carish”), and O2/He coreactant were investigated. Instead of varying the Carish precursor dose to optimize the growth rate per cycle, the precursor dose was optimized to reduce the film resistivity from 18.5 to 10.2 μΩ cm. By varying the O2/He coreactant dose, the substrate selectivity of the ALD process was successfully enhanced as evidenced by the increased nucleation delay on bis(N,N-dimethylamino)dimethylsilane passivated SiO2 over hydrofluoric acid-cleaned SiO2. These findings highlight the importance of dose optimization beyond the ALD saturation point in developing a selective and low resistivity Ru ALD process. Density functional theory calculations were performed to provide a mechanistic understanding of the underlying surface reactions of the Carish precursor and the roles of CH3 passivation and O2 coreactants.

Förderung

  • Semiconductor Research Corporation

Zitieren

APA

Wang, V., Breeden, M., Ashburn, N., Bergschneider, M., Spiegelman, J., Simka, H., Cho, K., & Kummel, A. C. (2023). Role of dose optimization in Ru atomic layer deposition for low resistivity films. Journal of Vacuum Science & Technology B, 41(1). https://doi.org/10.1116/6.0002153

Vancouver

Wang V, Breeden M, Ashburn N, Bergschneider M, Spiegelman J, Simka H, et al. Role of dose optimization in Ru atomic layer deposition for low resistivity films. Journal of Vacuum Science & Technology B. 2023;41(1). doi:10.1116/6.0002153

BibTeX
@article{Wang2023,
  author = {Wang, Victor and Breeden, Michael and Ashburn, Nickolas and Bergschneider, Matthew and Spiegelman, Jacob and Simka, Harsono and Cho, Kyeongjae and Kummel, Andrew C.},
  title = {Role of dose optimization in Ru atomic layer deposition for low resistivity films},
  journal = {Journal of Vacuum Science & Technology B},
  year = {2023},
  volume = {41},
  number = {1},
  doi = {10.1116/6.0002153}
}
Kostenlos starten →