EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Detailed-chemistry numerical investigation of flame-holder geometry effects on radiative performance and flame anchoring in premixed hydrogen micro-combustors

Iman Bahrabadi Jovein, Javad Bashtani

ASME Open Journal of Engineering · 13.11.2026 · 1-82

DOI: 10.1115/1.4072782 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ASME Open Journal of Engineering, online erschienen am 13.11.2026. Verfasst von Iman Bahrabadi Jovein und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hydrogen-fueled micro-combustion systems are promising heat sources for micro-thermophotovoltaic (micro-TPV) applications, where improving radiative efficiency directly enhances electrical power output. This study numerically investigates premixed hydrogen–air combustion in a heated microchannel combustor using the full Yetter H2/O2 detailed kinetic mechanism (9 species, 21 elementary reactions) with In-Situ Adaptive Tabulation (ISAT), within a transient 2D finite-volume framework validated against published DNS data. The principal contribution is a systematic comparison of three equal-blockage bluff-body cross-sections (square, triangular, and semicircular) with explicit resolution of OH, H, and O radical distributions, conjugate heat transfer, and wall radiation. Parametric evaluations show that increasing the equivalence ratio toward stoichiometric conditions improves radiative efficiency up to 49.5%, whereas increasing inlet velocity from 10 to 30 m/s reduces efficiency from 28.82% to 5.07% due to residence-time constraints. At reference conditions (φ = 0.5, Uin = 10 m/s), the square flame holder achieves the highest radiative efficiency (30.46%), outperforming triangular and semicircular shapes up to 1.64 percentage points. Although inter-geometry differences are modest and close to grid sensitivity, the square geometry establishes a larger and stronger recirculation zone that promotes flame anchoring and wall thermal uniformity. These findings provide chemically detailed design insights for micro-TPV systems within acknowledged 2D and inert-wall modeling assumptions.

Zitieren

APA

Jovein, I. B., & Bashtani, J. (2026). Detailed-chemistry numerical investigation of flame-holder geometry effects on radiative performance and flame anchoring in premixed hydrogen micro-combustors. ASME Open Journal of Engineering, 1-82. https://doi.org/10.1115/1.4072782

Vancouver

Jovein IB, Bashtani J. Detailed-chemistry numerical investigation of flame-holder geometry effects on radiative performance and flame anchoring in premixed hydrogen micro-combustors. ASME Open Journal of Engineering. 2026:1-82. doi:10.1115/1.4072782

BibTeX
@article{Jovein2026,
  author = {Jovein, Iman Bahrabadi and Bashtani, Javad},
  title = {Detailed-chemistry numerical investigation of flame-holder geometry effects on radiative performance and flame anchoring in premixed hydrogen micro-combustors},
  journal = {ASME Open Journal of Engineering},
  year = {2026},
  pages = {1--82},
  doi = {10.1115/1.4072782}
}
Kostenlos starten →