Experimental Evaluation of Hydrogen Addition in Liquefied Natural Gas Peak-Shaving Systems: Thermal and Material Response
Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy · 01.12.2026 · 2 (12)
DOI: 10.1115/1.4072748 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy, online erschienen am 14.10.2026. Verfasst von A.R. Tajik und 9 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben.
Abstract (Originalsprache)
The study investigates the effects of hydrogen addition on the thermophysical behavior of liquefied natural gas (LNG) and the performance of 9% nickel steel used in peak-shaving systems. An intermediate-scale experimental program exceeding 800 h was conducted using a 95-liter cryogenic dewar. Hydrogen sparging produced measurable cooling, with temperature reductions of approximately 3 °C at moderate injection rates and up to 11 °C at higher rates. Hydrogen concentrations were the highest in vapor space, while vaporized samples withdrawn from the liquid contained less than approximately 0.3% hydrogen. Hydrogen associated with the liquid samples decreased below the measurement limit within approximately 48 h after sparging ceased. Complementary material testing included a 38-day cryogenic exposure, during which no crack extension was observed. Because the dewar-exposed specimens did not satisfy linear-elastic fracture-mechanics validity requirements, they were used to assess crack extension rather than valid fracture toughness. Separate room-temperature hydrogen tests showed fracture-toughness reductions of approximately 25% at 100 psig and up to 75% at 1000–3000 psig. These elevated-pressure tests provide a conservative indication of material susceptibility and are not directly representative of low-pressure cryogenic LNG storage conditions. The results show that hydrogen can lower LNG storage temperatures and may affect 9% nickel-steel fracture resistance under certain conditions, supporting further tank-specific and longer-duration evaluations.
Zitieren
APA
Tajik, A., Wileman, A., Brysch, J., Ramirez, G., Godush, M., Hickey, F., Rowe, S., Morris, L., Vitale, S., & Chaillou, S. (2026). Experimental Evaluation of Hydrogen Addition in Liquefied Natural Gas Peak-Shaving Systems: Thermal and Material Response. Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy, 2(12). https://doi.org/10.1115/1.4072748
Vancouver
Tajik A, Wileman A, Brysch J, Ramirez G, Godush M, Hickey F, et al. Experimental Evaluation of Hydrogen Addition in Liquefied Natural Gas Peak-Shaving Systems: Thermal and Material Response. Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy. 2026;2(12). doi:10.1115/1.4072748
BibTeX
@article{Tajik2026,
author = {Tajik, A.R. and Wileman, A. and Brysch, J. and Ramirez, G. and Godush, M. and Hickey, F. and Rowe, S. and Morris, L. and Vitale, S. and Chaillou, S.},
title = {Experimental Evaluation of Hydrogen Addition in Liquefied Natural Gas Peak-Shaving Systems: Thermal and Material Response},
journal = {Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy},
year = {2026},
volume = {2},
number = {12},
doi = {10.1115/1.4072748}
}
EUVIMED