EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Fan Rig Darmstadt: Phase-Resolved Aeroelastic Investigation of Transonic Fan Flutter

Silas Mütschard, Nicklas Kilian, Marvin Rüdel, Bernd Becker, Bharat Lad

Journal of Turbomachinery · 01.11.2026 · 148 (11)

DOI: 10.1115/1.4072717 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 30.09.2026. Verfasst von Silas Mütschard und 4 weiteren Autor:innen. Die Arbeit nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article introduces the Fan Rig Darmstadt as a high-speed aeromechanics test facility for experimental investigations on modern transonic fan stages and proposes a novel approach for phase-resolved fluid–structure interaction analysis. The facility layout, instrumentation, and results from the baseline campaign are presented. A fan stage was tested under representative conditions across its operating range, including transient throttle maneuvers at the stability limit. For all investigated speeds, the upper operating boundary was limited by flutter. Established methods are applied for performance, aerodynamic, and aeroelastic characterization. The fan map and selected steady-state aerodynamic results demonstrate representative transonic fan characteristics, including tip-shock structures, shock–tip-leakage interaction, blade wakes, and spanwise pressure ratio distributions. Three flutter events are characterized using spectral and correlation-based methods. The results reveal first bending mode flutter with speed-dependent nodal diameters and no evidence of a convective mechanism. In addition, a post-processing approach is proposed and demonstrated to determine casing-pressure-based fluid–structure phase values near the blade tip in the rotating frame of reference from conventional casing-mounted instrumentation. Casing wall pressure is extracted close to the blade pressure and suction sides using pressure-based blade time of arrival and is related in phase to capacitive blade-tip-timing deflection using least-squares fitting. Application to a representative flutter event shows convergent phase values during flutter onset. The method provides an experimentally accessible quantity for experimental–numerical comparison and validation of casing-pressure-based fluid–structure phase during fan flutter.

Zitieren

APA

Mütschard, S., Kilian, N., Rüdel, M., Becker, B., & Lad, B. (2026). The Fan Rig Darmstadt: Phase-Resolved Aeroelastic Investigation of Transonic Fan Flutter. Journal of Turbomachinery, 148(11). https://doi.org/10.1115/1.4072717

Vancouver

Mütschard S, Kilian N, Rüdel M, Becker B, Lad B. The Fan Rig Darmstadt: Phase-Resolved Aeroelastic Investigation of Transonic Fan Flutter. Journal of Turbomachinery. 2026;148(11). doi:10.1115/1.4072717

BibTeX
@article{Mtschard2026,
  author = {Mütschard, Silas and Kilian, Nicklas and Rüdel, Marvin and Becker, Bernd and Lad, Bharat},
  title = {The Fan Rig Darmstadt: Phase-Resolved Aeroelastic Investigation of Transonic Fan Flutter},
  journal = {Journal of Turbomachinery},
  year = {2026},
  volume = {148},
  number = {11},
  doi = {10.1115/1.4072717}
}
Kostenlos starten →