Effectiveness of an Acoustic Liner for Reducing Forcing and Acoustic Response Due to Distortion
Journal of Turbomachinery · 01.11.2026 · 148 (11)
DOI: 10.1115/1.4072716 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 29.09.2026. Verfasst von Hans Mårtensson und 1 weiteren Autor:innen. Die Arbeit nennt 14 Literaturangaben. Gefördert von: VINNOVA.
Abstract (Originalsprache)
Transonic fans subjected to the inlet distortion will respond with unsteady pressures as the blades move through the flow field. Possible consequences of this include harmonic forces that cause blades to vibrate and increased noise emissions. The objective of this study is to investigate how acoustic liners can be used to reduce the response due to total pressure distortion. This is done by using computational fluid dynamics to analyze how harmonic forces and sound power levels are affected by modifying the impedance on the end wall and comparing with reference results with a hard wall. Distortion is imposed in a range of wave numbers around the cut-on limits where the response is found to be dominant. Analysis results include low subsonic and transonic operating speeds. Also, a transmission line method is used to find the dimensions of a liner that is feasible to use on the fan, and to derive realistic impedance values for different corrected speeds. The primary objective pursued in this study is to reduce the forcing at part speed close to the cut-on limit. In addition, substantial reduction of the emitted sound power level is observed in several relevant cases. It is also shown that the reduction of harmonic forcing and noise levels can be achieved using a realistic liner design.
Förderung
- VINNOVA
Zitieren
APA
Mårtensson, H., & Billson, M. (2026). Effectiveness of an Acoustic Liner for Reducing Forcing and Acoustic Response Due to Distortion. Journal of Turbomachinery, 148(11). https://doi.org/10.1115/1.4072716
Vancouver
Mårtensson H, Billson M. Effectiveness of an Acoustic Liner for Reducing Forcing and Acoustic Response Due to Distortion. Journal of Turbomachinery. 2026;148(11). doi:10.1115/1.4072716
BibTeX
@article{Mrtensson2026,
author = {Mårtensson, Hans and Billson, Mattias},
title = {Effectiveness of an Acoustic Liner for Reducing Forcing and Acoustic Response Due to Distortion},
journal = {Journal of Turbomachinery},
year = {2026},
volume = {148},
number = {11},
doi = {10.1115/1.4072716}
}
EUVIMED