EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Size-Dependence of Plane Strain Fracture Toughness: A Mechanistic Analysis by Enforcing Constant Crack Tip Fracture Stress and Scaling Laws

K. S. Ravi Chandran

Journal of Applied Mechanics · 01.11.2026 · 93 (11)

DOI: 10.1115/1.4072573 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Mechanics, online erschienen am 16.09.2026. Verfasst von K. S. Ravi Chandran. Die Arbeit nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Experimental measurements of plane strain fracture toughness, made using single-edge-notched-bend specimens, show strong crack (or ligament) size and specimen size effects on toughness. The fracture toughness varies strongly with crack size even at relatively small crack sizes, where linear elastic conditions are applicable. Most experimental data on brittle and relatively ductile materials show such behaviors. This study focuses on exploring why the crack size and the specimen size (width) influence the plane strain fracture toughness so strongly and provides a mechanistic explanation based on the change in elastic strain energy stored in the net-section due to the crack. A net-section-based analysis of elastic deformation of the ligament, with the enforcement of a constant crack-tip fracture stress at all crack lengths, shows that fracture toughness indeed should vary with crack size and specimen width. It is shown that in most materials, fracture occurs at a constant crack-tip fracture stress that is nearly equal to the tensile strength. Extensive evaluation using data from a diverse set of materials demonstrates the validity of this approach. In exceptional cases, fractures still occurred at constant crack tip stresses at all crack and specimen sizes, although these stresses are significantly lower than the tensile strength. The analysis and data show that plane strain fracture toughness (KIC) is not a material property. The net-section stress analysis also leads to expressions to predict the fracture toughness variation with crack/specimen size, facilitating the scaling of fracture toughness from small or laboratory specimens to large structures, with constant crack tip fracture stress enforced as the fracture criterion.

Zitieren

APA

Chandran, K. S. R. (2026). The Size-Dependence of Plane Strain Fracture Toughness: A Mechanistic Analysis by Enforcing Constant Crack Tip Fracture Stress and Scaling Laws. Journal of Applied Mechanics, 93(11). https://doi.org/10.1115/1.4072573

Vancouver

Chandran KSR. The Size-Dependence of Plane Strain Fracture Toughness: A Mechanistic Analysis by Enforcing Constant Crack Tip Fracture Stress and Scaling Laws. Journal of Applied Mechanics. 2026;93(11). doi:10.1115/1.4072573

BibTeX
@article{Chandran2026,
  author = {Chandran, K. S. Ravi},
  title = {The Size-Dependence of Plane Strain Fracture Toughness: A Mechanistic Analysis by Enforcing Constant Crack Tip Fracture Stress and Scaling Laws},
  journal = {Journal of Applied Mechanics},
  year = {2026},
  volume = {93},
  number = {11},
  doi = {10.1115/1.4072573}
}
Kostenlos starten →