EUVIMEDEUVIMED entdecken
Crossref

Optimization of Film Cooling Simulation Via Neural Network-Based GEKO Turbulence Model Training

Yu Xia, George Klavaris

Journal of Turbomachinery · 01.09.2026 · 148 (10)

DOI: 10.1115/1.4072544 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 04.09.2026. Verfasst von Yu Xia und 1 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The present study investigates the generalized k−ω (GEKO) turbulence model trained by a feed forward neural network for the improvement of gas turbine film cooling simulations. The key flow features from the GEKO simulation are used as the inputs for the neural network, and the turbulence kinetic energy source coefficient of the GEKO model serves as the output parameter. Both the inputs and the output are being updated by the adjoint optimization during each training cycle, known as a “design iteration.” The training of the GEKO model is successful on a very coarse mesh of the single-hole, jet-in-crossflow MIT Liner film cooling case. The trained GEKO solutions better match the large eddy simulation (LES) and the experiments than the untrained GEKO on the wall heat fluxes. In addition, the trained GEKO model can be extended to another flow blowing ratio and cooling material of the MIT Liner, without any retraining. Furthermore, the same trained GEKO can even be applied to a multi-hole, film-cooled perforated plate case with complex geometry, where the trained GEKO considerably improves the plate’s wall temperature predictions, better matching the LES and the measurements than the untrained GEKO model. The present automated GEKO training workflow, and the good generalizability of the trained GEKO model across different film cooling conditions and geometries, may help the gas turbine industry speed-up the film cooling design process for components such as combustor liners and turbine blades, saving a significant amount of computational time and resources.

Zitieren

APA

Xia, Y., & Klavaris, G. (2026). Optimization of Film Cooling Simulation Via Neural Network-Based GEKO Turbulence Model Training. Journal of Turbomachinery, 148(10). https://doi.org/10.1115/1.4072544

Vancouver

Xia Y, Klavaris G. Optimization of Film Cooling Simulation Via Neural Network-Based GEKO Turbulence Model Training. Journal of Turbomachinery. 2026;148(10). doi:10.1115/1.4072544

BibTeX
@article{Xia2026,
  author = {Xia, Yu and Klavaris, George},
  title = {Optimization of Film Cooling Simulation Via Neural Network-Based GEKO Turbulence Model Training},
  journal = {Journal of Turbomachinery},
  year = {2026},
  volume = {148},
  number = {10},
  doi = {10.1115/1.4072544}
}
Kostenlos starten →