Enhanced Tribological and Corrosion Performance of Lubricants Using Eco-Engineered Layered Double Hydroxide-Based Hybrid Additives
Journal of Tribology · 01.12.2026 · 148 (12)
DOI: 10.1115/1.4072514 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Tribology, online erschienen am 26.08.2026. Verfasst von Siddharth Atal und 7 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 92 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
An eco-friendly biomass-containing Layered Double Hydroxide (LDH)-based hybrid additive was developed using three different LDH materials: Ni/Al-LDH, borate-LDH, and phosphate-LDH. The individual additives Ni/Al-LDH (LDH), borate-LDH (B), phosphate-LDH (P), and biomass additive (Q) were evaluated for corrosion protection and tribological performance on API 5L X70 steel. Tribological testing demonstrated a substantial reduction in coefficient of friction, decreasing from approximately 0.20 to 0.03 with LDH-P-B-Q under boundary lubrication conditions. Electrochemical studies conducted according to ASTM G199-09 and ASTM G185 standards revealed excellent corrosion protection, with nearly 97% reduction in corrosion rate and decrease in fluid-flow corrosion from 75 × 10−6 to 23 × 10−7 mm · year−1. Rheological analysis showed that the additive-containing lubricant possessed higher viscosity (213–235 mPa · s) compared to the base oil (190 mPa · s), promoting stronger lubricating film formation, enhanced load-carrying capacity, and reduced surface wear. The lubricant exhibited near-Newtonian flow behavior according to the Ostwald-de Waele model, indicating stable flow characteristics across varying shear conditions. X-Ray Diffraction (XRD) and Field Emission Scanning Electron Microscopy (FESEM) confirmed the robust layered architecture of LDH-P-B-Q. Although all formulations displayed similar contact angles, the higher viscosity of LDH-P-B-Q enabled superior surface separation and load-bearing capability under boundary lubrication. The biomass component is believed to contribute to thermal stability and viscosity retention through its carbon-rich domains. Furthermore, Ultraviolet–Visible (UV–Vis) and Fourier Transform Infrared Spectroscopy (FTIR) analyses confirmed the nontoxic nature of the engineered biomass.
Zitieren
APA
Atal, S., Pandey, S. K., Upadhyay, S. M., Kumar, S., Sanjay, T., Hirani, H., McCoy, T. M., & Dwivedi, D. (2026). Enhanced Tribological and Corrosion Performance of Lubricants Using Eco-Engineered Layered Double Hydroxide-Based Hybrid Additives. Journal of Tribology, 148(12). https://doi.org/10.1115/1.4072514
Vancouver
Atal S, Pandey SK, Upadhyay SM, Kumar S, Sanjay T, Hirani H, et al. Enhanced Tribological and Corrosion Performance of Lubricants Using Eco-Engineered Layered Double Hydroxide-Based Hybrid Additives. Journal of Tribology. 2026;148(12). doi:10.1115/1.4072514
BibTeX
@article{Atal2026,
author = {Atal, Siddharth and Pandey, Sujeet Kumar and Upadhyay, Sankat Mochan and Kumar, Saurabh and Sanjay, Thommandru and Hirani, Harish and McCoy, Thomas M. and Dwivedi, Deepak},
title = {Enhanced Tribological and Corrosion Performance of Lubricants Using Eco-Engineered Layered Double Hydroxide-Based Hybrid Additives},
journal = {Journal of Tribology},
year = {2026},
volume = {148},
number = {12},
doi = {10.1115/1.4072514}
}
EUVIMED