EUVIMEDEUVIMED entdecken
Crossref

Development of a New RANS-Based Surface Roughness Model for Multifidelity 3D Computational Fluid Dynamics

Ilias Vasilopoulos, Dario Amirante, Marcus Meyer, Nick Hills

Journal of Turbomachinery · 01.10.2026 · 148 (10)

DOI: 10.1115/1.4072502 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 03.09.2026. Verfasst von Ilias Vasilopoulos und 3 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Gefördert von: Bundesministerium für Wirtschaft und Energie.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article deals with the computational fluid dynamics (CFD)-based modeling of surface roughness, a very challenging topic, which has been increasingly gaining popularity in turbomachinery applications. One approach to model the impact of roughness on the flow over a surface is to derive a roughness wall function that is responsible for shifting the log-law of the boundary layer downward, which is indeed a result of the increased wall shear stress caused by roughness. Another approach is to modify the boundary conditions of the turbulence model at the wall, in such a way that the produced turbulent viscosity mimics the roughness-generated turbulence. In this work, a new roughness model belonging to the latter category has been implemented in an in-house Reynolds-averaged Navier–Stokes (RANS) solver, based on the k–ω shear stress transport (SST) turbulence model. Using the standard equivalent sand-grain roughness parameter as input, the model modifies accordingly the specific dissipation rate (ω) at the wall, which ultimately leads to an increased turbulent viscosity. The model has been trained/calibrated to match pressure losses generated in roughness-resolved channel flow simulations, the roughness of which is representative of deposition-generated roughness and was obtained from previous investigations on in-service high-pressure compressor blades. Verification has been performed on various zero and nonzero pressure gradient channel flow configurations, and experimental validation on a high-pressure turbine cascade. Finally, as simply being a modification to the commonly employed k–ω SST turbulence model, this roughness modeling capability can also be extended to high-fidelity scale-resolving simulations, as demonstrated here via coupling with a hybrid unsteady Reynolds-averaged Navier–Stokes (URANS)–large eddy simulation (LES) methodology.

Förderung

  • Bundesministerium für Wirtschaft und Energie

Zitieren

APA

Vasilopoulos, I., Amirante, D., Meyer, M., & Hills, N. (2026). Development of a New RANS-Based Surface Roughness Model for Multifidelity 3D Computational Fluid Dynamics. Journal of Turbomachinery, 148(10). https://doi.org/10.1115/1.4072502

Vancouver

Vasilopoulos I, Amirante D, Meyer M, Hills N. Development of a New RANS-Based Surface Roughness Model for Multifidelity 3D Computational Fluid Dynamics. Journal of Turbomachinery. 2026;148(10). doi:10.1115/1.4072502

BibTeX
@article{Vasilopoulos2026,
  author = {Vasilopoulos, Ilias and Amirante, Dario and Meyer, Marcus and Hills, Nick},
  title = {Development of a New RANS-Based Surface Roughness Model for Multifidelity 3D Computational Fluid Dynamics},
  journal = {Journal of Turbomachinery},
  year = {2026},
  volume = {148},
  number = {10},
  doi = {10.1115/1.4072502}
}
Kostenlos starten →