Experimental Study of Humidity-Driven Particulate Fouling on Engineered Surfaces in Ultra-High Bypass Ratio Aircraft Engines
Journal of Turbomachinery · 01.09.2026 · 148 (9)
DOI: 10.1115/1.4072492 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 20.08.2026. Verfasst von Abhishek Borad und 3 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Engine heat-transfer surfaces in ultra-high bypass ratio (UHBR) turbofan engines are exposed to particle-laden high-speed flows in a humid environment that causes particulate deposition and progressive degradation of thermal performance. Therefore, an experimental test facility is developed to study the influences of surface topology, flow velocity, and humidity on particle transport and deposition mechanisms in humidified bypass flow conditions. The presented computational fluid dynamics results are used for the design of the deposition test facility. The experimental test is performed with Arizona road dust and the flow velocities can be set between 90 m/s and 230 m/s under controlled thermodynamic conditions and relative humidity levels ranging from approximately 30% to 100%. The particle deposition and surface degradation is quantified using full-field optical profilometry, enabling spatially resolved measurements of the deposit thickness and roughness evolution. The test specimens consisted of smooth flat plates and engineered dimpled surfaces representative of heat-transfer-enhancing structures. The experiments show that no measurable particle deposition is observed at low humidity [30% relative humidity (RH)], indicating that dry adhesion forces are insufficient to overcome wall shear stresses at these velocities. In contrast, saturated conditions (100% RH) resulted in stable deposit formation, with particles preferentially accumulating in low-shear recirculation regions on the upstream side of the dimple cavities. Increasing the jet velocity from 96.5 to 116.8 m/s reduced the deposited mass by nearly one order of magnitude, demonstrating the dominant role of shear-driven removal. The experimentally observed deposition patterns suggest a correlation with the CFD-predicted wall shear stress distribution. Furthermore, it is observed that the surface roughness of the test specimen is altered throughout the deposition experiments.
Zitieren
APA
Borad, A., Yang, X., Staudacher, S., & Hartmann, J. (2026). Experimental Study of Humidity-Driven Particulate Fouling on Engineered Surfaces in Ultra-High Bypass Ratio Aircraft Engines. Journal of Turbomachinery, 148(9). https://doi.org/10.1115/1.4072492
Vancouver
Borad A, Yang X, Staudacher S, Hartmann J. Experimental Study of Humidity-Driven Particulate Fouling on Engineered Surfaces in Ultra-High Bypass Ratio Aircraft Engines. Journal of Turbomachinery. 2026;148(9). doi:10.1115/1.4072492
BibTeX
@article{Borad2026,
author = {Borad, Abhishek and Yang, Xing and Staudacher, Stephan and Hartmann, Jan},
title = {Experimental Study of Humidity-Driven Particulate Fouling on Engineered Surfaces in Ultra-High Bypass Ratio Aircraft Engines},
journal = {Journal of Turbomachinery},
year = {2026},
volume = {148},
number = {9},
doi = {10.1115/1.4072492}
}
EUVIMED