EUVIMEDEUVIMED entdecken
Crossref

Effect of Pressure-Dependent Yielding of Polymer Matrix on Material Removal Mechanisms in CFRP Machining

Zhenghui Lu, Xiaoliang Jin

Journal of Manufacturing Science and Engineering · 01.10.2026 · 148 (10)

DOI: 10.1115/1.4072421 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing Science and Engineering, online erschienen am 11.08.2026. Verfasst von Zhenghui Lu und 1 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Gefördert von: Canada Research Chairs, Natural Sciences and Engineering Research Council of Canada.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Since the polymer matrix in carbon-fiber-reinforced polymers (CFRPs) exhibits pressure-dependent yielding, its deformation and failure behaviors differ when machining CFRPs at different fiber orientations (FOs), due to the different stress states in the cutting zone for each FO. However, existing micromechanical finite element (FE) models for machining CFRP modeled the polymer with pressure-independent constitutive models, which can lead to inaccurate simulations of CFRP material removal. This paper investigates the effect of pressure-dependent yielding of the polymer matrix on material-removal mechanisms during CFRP machining. A modified Drucker–Prager (D–P) model for the matrix is used in a micromechanical FE model of CFRP machining for the first time. The cutting forces, machined-surface topography, and chip morphology in simulations and experiments are compared for different FOs to validate the developed model. Results show that the pressure-dependent D–P model can capture both the matrix shear-deformation failure during cutting along fibers and the matrix brittle-cracking failure during cutting against fibers. Consequently, the model correctly simulates the sheet chip and smooth surface when cutting along fibers, and the block chip and saw-tooth surface when cutting against fibers. In comparison, the pressure-independent Mises model always predicts ductile shear-deformation failure for the matrix regardless of FO, and thus only captures the material removal when cutting along fibers. Compared to the Mises model, the D–P model improves cutting force prediction by 12.3% for cutting along fibers, and by 46.5% for cutting against fibers.

Förderung

  • Canada Research Chairs
  • Natural Sciences and Engineering Research Council of Canada

Zitieren

APA

Lu, Z., & Jin, X. (2026). Effect of Pressure-Dependent Yielding of Polymer Matrix on Material Removal Mechanisms in CFRP Machining. Journal of Manufacturing Science and Engineering, 148(10). https://doi.org/10.1115/1.4072421

Vancouver

Lu Z, Jin X. Effect of Pressure-Dependent Yielding of Polymer Matrix on Material Removal Mechanisms in CFRP Machining. Journal of Manufacturing Science and Engineering. 2026;148(10). doi:10.1115/1.4072421

BibTeX
@article{Lu2026,
  author = {Lu, Zhenghui and Jin, Xiaoliang},
  title = {Effect of Pressure-Dependent Yielding of Polymer Matrix on Material Removal Mechanisms in CFRP Machining},
  journal = {Journal of Manufacturing Science and Engineering},
  year = {2026},
  volume = {148},
  number = {10},
  doi = {10.1115/1.4072421}
}
Kostenlos starten →