Mechanics-Based Prediction of Total Thickness Variation in Silicon Carbide Substrates During Precision Grinding Based on an Equivalent Wheel-Deflection Model
Journal of Manufacturing Science and Engineering · 01.12.2026 · 148 (12)
DOI: 10.1115/1.4072420 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Manufacturing Science and Engineering, online erschienen am 17.08.2026. Verfasst von Haoxiang Wang und 3 weiteren Autor:innen. Die Arbeit nennt 85 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Precision grinding is a key technology for thinning silicon carbide substrates. However, the surface accuracy often deteriorates due to total thickness variation (TTV), which critically affects subsequent device fabrication and packaging. Existing research primarily focuses on correcting preset geometric alignment, such as the tilt between vacuum chucks and grinding wheels, while insufficiently considering the influence of force-induced structural deformation during grinding. In this article, a mechanics-based model is developed to predict TTV in silicon carbide substrate grinding based on an equivalent wheel-deflection model. The model quantitatively incorporates grinding process parameters and the material and geometric properties of the grinding wheel and substrate. By equivalently representing the force-induced compliance of the grinding system as wheel deflection, the model captures the resulting change in effective inclination angle and its influence on non-uniform material removal. Experimental validation shows that the model achieves high accuracy, with an average deviation of less than 4%. This work provides a mechanics-based basis for surface-form prediction and parameter-sensitive TTV compensation in precision grinding.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Wang, H., Guo, X., Kang, R., & Gao, S. (2026). Mechanics-Based Prediction of Total Thickness Variation in Silicon Carbide Substrates During Precision Grinding Based on an Equivalent Wheel-Deflection Model. Journal of Manufacturing Science and Engineering, 148(12). https://doi.org/10.1115/1.4072420
Vancouver
Wang H, Guo X, Kang R, Gao S. Mechanics-Based Prediction of Total Thickness Variation in Silicon Carbide Substrates During Precision Grinding Based on an Equivalent Wheel-Deflection Model. Journal of Manufacturing Science and Engineering. 2026;148(12). doi:10.1115/1.4072420
BibTeX
@article{Wang2026,
author = {Wang, Haoxiang and Guo, Xiaoguang and Kang, Renke and Gao, Shang},
title = {Mechanics-Based Prediction of Total Thickness Variation in Silicon Carbide Substrates During Precision Grinding Based on an Equivalent Wheel-Deflection Model},
journal = {Journal of Manufacturing Science and Engineering},
year = {2026},
volume = {148},
number = {12},
doi = {10.1115/1.4072420}
}
EUVIMED