Numerical Simulation of Hydrogen-Blended Natural Gas Pipeline Leakage and Dispersion Based on ansys fluent
Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy · 01.09.2026 · 2 (9)
DOI: 10.1115/1.4072414 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy, online erschienen am 11.08.2026. Verfasst von Zexiong Wei und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 23 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Hydrogen blending into natural gas pipelines is regarded as a practical transitional pathway for large-scale hydrogen transportation and sustainable gas-energy infrastructure utilization. However, the addition of hydrogen changes gas-mixture properties, in-pipe distribution, leakage behavior, and postleakage safety risks. In this study, ansys fluent was employed to establish a three-dimensional T-junction pipeline mixing–leakage model and a two-dimensional open-environment dispersion model to investigate the leakage and dispersion characteristics of hydrogen-blended natural gas under different hydrogen blending ratios, leakage-hole diameters, and ambient wind speeds. The results indicate that obvious local hydrogen enrichment and stratification occur in the pipeline after mixing at the T-junction, with the upper part of the main pipe being more prone to hydrogen accumulation. As the hydrogen blending ratio increases, both the dispersion rate and buoyancy-driven rise of the leaked gas are significantly enhanced. Under the conditions of a wind speed of 5 m/s and a leakage-hole diameter of 10 mm, when the hydrogen blending ratio increases from 20% to 40%, the dispersion range increases by approximately 35%, and the gas cloud exhibits a more pronounced mushroom-cloud-like upward dispersion pattern. Leakage-hole diameter is the key factor governing leakage intensity. Under the same pressure condition, when the leakage-hole diameter increases from 1 mm to 10 mm, the orifice area increases by a factor of 100, while the simulated average outlet velocity increases by approximately 4.57–5.21 times depending on the hydrogen blending ratio. In addition, increasing ambient wind speed promotes the downstream extension of the gas cloud while suppressing lateral dispersion. When the wind speed rises from 1 m/s to 5 m/s, the dispersion range increases by approximately 40% and 60% for hydrogen blending ratios of 20% and 40%, respectively. These findings demonstrate that the hydrogen blending ratio, leakage-hole diameter, and ambient wind speed jointly determine the leakage and dispersion characteristics of hydrogen-blended natural gas, among which hole diameter has the most significant effect on leakage dynamics. The results of this study can provide a theoretical basis for risk warning, safety distance design, and emergency response in hydrogen-blended natural gas pipelines.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Wei, Z., Du, G., Liu, B., Gui, Y., & Lu, Q. (2026). Numerical Simulation of Hydrogen-Blended Natural Gas Pipeline Leakage and Dispersion Based on ansys fluent. Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy, 2(9). https://doi.org/10.1115/1.4072414
Vancouver
Wei Z, Du G, Liu B, Gui Y, Lu Q. Numerical Simulation of Hydrogen-Blended Natural Gas Pipeline Leakage and Dispersion Based on ansys fluent. Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy. 2026;2(9). doi:10.1115/1.4072414
BibTeX
@article{Wei2026,
author = {Wei, Zexiong and Du, Guofeng and Liu, Bing and Gui, Yubin and Lu, Qian},
title = {Numerical Simulation of Hydrogen-Blended Natural Gas Pipeline Leakage and Dispersion Based on ansys fluent},
journal = {Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy},
year = {2026},
volume = {2},
number = {9},
doi = {10.1115/1.4072414}
}
EUVIMED