EUVIMEDEUVIMED entdecken
Crossref

Controlling Helical Instability by Modifying the Shape of Swirler Centerbody in an Isothermal Turbulent Swirl Combustor Flow

Ratnesh Pathak, Nitesh Kumar Sahu, Anupam Dewan, Mayank Kumar

Journal of Fluids Engineering · 01.11.2026 · 148 (11)

DOI: 10.1115/1.4072363 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Fluids Engineering, online erschienen am 03.08.2026. Verfasst von Ratnesh Pathak und 3 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Swirling flows underpin engineering systems, yet their dominant instability—the precessing vortex-core (PVC) associated with vortex-breakdown—can cause detrimental flame wrinkling, pressure oscillations, and increased pollutant formation. This work examines how swirler centerbody (CB) geometry alters PVC dynamics in a nonreacting, isothermal swirl-combustor. Unsteady Reynolds-averaged Navier–Stokes (URANS) simulations with shear-stress-transport (SST) k–ω model are performed for double-bullet and cylindrical CBs, with grid-independence and validation against reported measurements. PVC characteristics are extracted using two-point cross-spectral analysis of axial-velocity fluctuations near inner shear layer, time-domain signals for persistence, and low-pressure isosurfaces for associated vortex-core (VC) visualization. Both configurations exhibit a dominant m=1 correlated oscillatory component. Double-bullet case shows a strong PVC at ≈122 Hz, whereas cylindrical CB shifts it to ≈25 Hz and substantially attenuates the oscillation. Low-pressure isosurfaces show a clear asymmetric single-helical VC in double-bullet case, while cylindrical-CB case possesses a more symmetric near-swirler core with a weakly asymmetric downstream extension, i.e., deformed single-helical VC. The resolved fluctuations remain largely persistent in both cases. Further, the weak persistent response in cylindrical CB case is not fully explained by expected eigenmode-based suppression/intermittency. Accordingly, eigenmode-based interpretation here appears to be sensitive to mean-flow linearization and turbulence model used in URANS for predicting mean-flow topology; therefore, PVC behavior deduced from linear eigenmodes and mean-flow state should be interpreted here only qualitatively.

Zitieren

APA

Pathak, R., Sahu, N. K., Dewan, A., & Kumar, M. (2026). Controlling Helical Instability by Modifying the Shape of Swirler Centerbody in an Isothermal Turbulent Swirl Combustor Flow. Journal of Fluids Engineering, 148(11). https://doi.org/10.1115/1.4072363

Vancouver

Pathak R, Sahu NK, Dewan A, Kumar M. Controlling Helical Instability by Modifying the Shape of Swirler Centerbody in an Isothermal Turbulent Swirl Combustor Flow. Journal of Fluids Engineering. 2026;148(11). doi:10.1115/1.4072363

BibTeX
@article{Pathak2026,
  author = {Pathak, Ratnesh and Sahu, Nitesh Kumar and Dewan, Anupam and Kumar, Mayank},
  title = {Controlling Helical Instability by Modifying the Shape of Swirler Centerbody in an Isothermal Turbulent Swirl Combustor Flow},
  journal = {Journal of Fluids Engineering},
  year = {2026},
  volume = {148},
  number = {11},
  doi = {10.1115/1.4072363}
}
Kostenlos starten →