EUVIMEDEUVIMED entdecken
Crossref

Experimental Investigation of Film Cooling Effectiveness at Different Enthalpies

Jithin Sreekumar, Honhar Gupta, Soumya Ranjan Nanda, Mohammed Ibrahim Sugarno

ASME Journal of Heat and Mass Transfer · 01.12.2026 · 148 (12)

DOI: 10.1115/1.4072343 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ASME Journal of Heat and Mass Transfer, online erschienen am 30.07.2026. Verfasst von Jithin Sreekumar und 3 weiteren Autor:innen. Die Arbeit nennt 59 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Experiments were carried out to assess the effectiveness of opposing jet film cooling at hypersonic flow conditions by utilizing a simple flat-faced cylindrical injector. Two different enthalpy conditions, 2.8 MJ/kg and 4.9 MJ/kg, were generated using the shock tunnel and expansion tunnel facilities, with air as the test gas. The flat-faced cylinder had a 2 mm orifice at its center, through which the nitrogen gas coolant was injected. Coaxial surface junction thermocouples were used to obtain the convective heat flux values. The analysis of the flowfield and shock structures was done using high-speed schlieren imaging. Coolant gas was injected at pressure ratios (PR) of 3.3 and 5 into the freestream. It was observed that the injection of coolant successfully caused reductions in the heat flux for all the cases, and an improvement in cooling effectiveness was observed as the pressure ratio was increased. While comparing low and high-enthalpy conditions at the same pressure ratio (PR = 5), it came to light that cooling effectiveness was higher for the low-enthalpy case, which is attributed to the higher coolant mass flow rate and higher diffusivity. Additionally, while comparing two different enthalpy cases having similar coolant mass flow rates, namely, the PR = 3.3 low-enthalpy case and the PR = 5 high-enthalpy case, it was observed that the cooling effectiveness was contingent upon how well the coolant gas diffused across the flowfield.

Zitieren

APA

Sreekumar, J., Gupta, H., Nanda, S. R., & Sugarno, M. I. (2026). Experimental Investigation of Film Cooling Effectiveness at Different Enthalpies. ASME Journal of Heat and Mass Transfer, 148(12). https://doi.org/10.1115/1.4072343

Vancouver

Sreekumar J, Gupta H, Nanda SR, Sugarno MI. Experimental Investigation of Film Cooling Effectiveness at Different Enthalpies. ASME Journal of Heat and Mass Transfer. 2026;148(12). doi:10.1115/1.4072343

BibTeX
@article{Sreekumar2026,
  author = {Sreekumar, Jithin and Gupta, Honhar and Nanda, Soumya Ranjan and Sugarno, Mohammed Ibrahim},
  title = {Experimental Investigation of Film Cooling Effectiveness at Different Enthalpies},
  journal = {ASME Journal of Heat and Mass Transfer},
  year = {2026},
  volume = {148},
  number = {12},
  doi = {10.1115/1.4072343}
}
Kostenlos starten →