Numerical Simulation of Complex Fracture Propagation in Multistage Temporary Plugging and Diverting Fracturing for Tight Oil Reservoirs
Journal of Energy Resources Technology, Part B: Subsurface Energy and Carbon Capture · 01.12.2026 · 2 (6)
DOI: 10.1115/1.4072338 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Energy Resources Technology, Part B: Subsurface Energy and Carbon Capture, online erschienen am 10.08.2026. Verfasst von Zhiheng Tao und 4 weiteren Autor:innen. Die Arbeit nennt 42 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Conventional numerical models for temporary plugging and diverting fracturing generally neglect the combined effects of in-fracture plugging and fracture-mouth plugging, limiting their capability to accurately characterize complex fracture propagation in tight oil reservoirs. To overcome this limitation, this study innovatively integrates the cohesive zone model (CZM) with a user-defined field (USDFLD) subroutine in abaqus software to simulate multistage temporary plugging based on injection timing and establishes a fracture propagation model using the maximum circumferential stress criterion. The proposed framework enables sequential simulation of fracture initiation, propagation, and stress-field evolution during multistage diverting fracturing. Simulation results demonstrate that temporary plugging significantly modifies both the magnitude and orientation of the in situ stress field, generating localized stress-weak zones that control the initiation positions of subsequent branch fractures. Under an initial horizontal stress difference of 1 MPa, the first branch fracture initiates approximately 43 m from the wellbore with an initiation angle of 52.7 deg, while the required net pressure increase for branch-fracture initiation rises progressively from 1.82 MPa in the first plugging stage to 6.45 MPa after six stages. Furthermore, linear correlations with high fitting accuracy (R2 > 0.96) are established between the maximum horizontal stress difference and key fracture geometric parameters, including fracture initiation angle, diversion radius, and spacing between plugging and initiation locations. The simulations further reveal that when the horizontal stress difference increases to 7–8 MPa, the diversion radius decreases substantially, making the formation of effective branch fractures considerably more difficult. By introducing a CZM–USDFLD coupled numerical framework for simulating multistage TPD fracturing and quantitatively revealing the evolution laws of fracture geometry under different stress conditions, this study provides a reliable theoretical basis and practical guidance for optimizing temporary plugging design and enhancing fracture network complexity in tight oil reservoirs. The objective of this study is not only to investigate the fracture propagation mechanism during multistage temporary plugging and diverting fracturing but also to establish quantitative relationships that can support field-scale fracturing design and optimization.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Tao, Z., Wang, D., Di, S., Liu, Y., & Miao, Y. (2026). Numerical Simulation of Complex Fracture Propagation in Multistage Temporary Plugging and Diverting Fracturing for Tight Oil Reservoirs. Journal of Energy Resources Technology, Part B: Subsurface Energy and Carbon Capture, 2(6). https://doi.org/10.1115/1.4072338
Vancouver
Tao Z, Wang D, Di S, Liu Y, Miao Y. Numerical Simulation of Complex Fracture Propagation in Multistage Temporary Plugging and Diverting Fracturing for Tight Oil Reservoirs. Journal of Energy Resources Technology, Part B: Subsurface Energy and Carbon Capture. 2026;2(6). doi:10.1115/1.4072338
BibTeX
@article{Tao2026,
author = {Tao, Zhiheng and Wang, Daobing and Di, Shiying and Liu, Yahui and Miao, Yangyang},
title = {Numerical Simulation of Complex Fracture Propagation in Multistage Temporary Plugging and Diverting Fracturing for Tight Oil Reservoirs},
journal = {Journal of Energy Resources Technology, Part B: Subsurface Energy and Carbon Capture},
year = {2026},
volume = {2},
number = {6},
doi = {10.1115/1.4072338}
}
EUVIMED