EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Structure-Aligned Geometric Compensation for Additive Manufacturing Warpage via Vibrational Modal Analysis

Yifei Ye, Lijie Liu, Yiliang Liao, Stephen Holland, Adarsh Krishnamurthy, Qing Li

Journal of Manufacturing Science and Engineering · 01.11.2026 · 148 (11)

DOI: 10.1115/1.4072276 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing Science and Engineering, online erschienen am 22.07.2026. Verfasst von Yifei Ye und 5 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additively manufactured parts can deviate from their nominal design due to process-induced deformation, such as residual-stress-driven warpage during thermal cycling, reducing dimensional accuracy. Geometric compensation seeks to correct this deviation by predeforming the design so that the printed part recovers its intended shape. Most existing approaches construct compensation by directly reversing the measured deformation field. However, direct inversion can propagate nonstructural components into the compensation rather than isolating the main structural deformation. To address this limitation, we reformulate geometric compensation as a representation problem of deformation, rather than purely an inversion problem. Accordingly, we reformulate compensation within a reduced structural modal subspace derived from vibrational modal analysis of the nominal structure. This modal representation restricts compensation to deformation patterns consistent with the part’s structural response. Finite-element simulations show that the proposed formulation effectively compensates additive-manufacturing warpage when deformation is dominated by structural response, remains robust to measurement and reconstruction errors, and suggests broader applicability to other geometry correction problems driven by coherent structural deformation.

Zitieren

APA

Ye, Y., Liu, L., Liao, Y., Holland, S., Krishnamurthy, A., & Li, Q. (2026). Structure-Aligned Geometric Compensation for Additive Manufacturing Warpage via Vibrational Modal Analysis. Journal of Manufacturing Science and Engineering, 148(11). https://doi.org/10.1115/1.4072276

Vancouver

Ye Y, Liu L, Liao Y, Holland S, Krishnamurthy A, Li Q. Structure-Aligned Geometric Compensation for Additive Manufacturing Warpage via Vibrational Modal Analysis. Journal of Manufacturing Science and Engineering. 2026;148(11). doi:10.1115/1.4072276

BibTeX
@article{Ye2026,
  author = {Ye, Yifei and Liu, Lijie and Liao, Yiliang and Holland, Stephen and Krishnamurthy, Adarsh and Li, Qing},
  title = {Structure-Aligned Geometric Compensation for Additive Manufacturing Warpage via Vibrational Modal Analysis},
  journal = {Journal of Manufacturing Science and Engineering},
  year = {2026},
  volume = {148},
  number = {11},
  doi = {10.1115/1.4072276}
}
Kostenlos starten →