EUVIMEDEUVIMED entdecken
Crossref

Novel Method for Power Consumption-Based Temperature Sensing in System on Chip Device

Piyush Kulkarni, Zechen Zhang, Bahgat Sammakia, Scott Schiffres

Journal of Electronic Packaging · 01.06.2026 · 148 (2)

DOI: 10.1115/1.4072236 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Electronic Packaging, online erschienen am 15.07.2026. Verfasst von Piyush Kulkarni und 3 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Gefördert von: Binghamton University, National Science Foundation, Semiconductor Research Corporation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A novel in situ method to indirectly sense changing thermal properties of the thermal interface material (TIM) without using any onboard temperature sensors is demonstrated. The technique can detect the average junction temperature at specific computational elements (Central Processing Unit (CPU) and Graphical Processing Unit (GPU)) by the temperature-dependent power consumption of these elements that have a periodically applied software stressor. The technique was demonstrated on a commercial system on chip (SOC) development kit. The temperature response for frequency-modulated heating depends on thermal conductivity, density, and specific heat of layers making up the test package. By selecting the modulation frequency, the thermal penetration depth can be varied to probe individual layers in the build-up of the electronic package. The total power consumption is used to sense a spatially localized computational element's temperature (e.g., specific core) by way of temperature-dependent leakage current in transistors. Simulations using different thermal conductivities for the TIM show the sensitivity of this technique to TIM layer degradation. This technique's temperature measurements are validated against the chip's onboard temperature with good agreement (within 1 K for ∼25 mm2 section in ∼100 mm2 SOC). Measurements by this technique make averaged measurements and can complement onboard temperature sensors, often located at periphery of the sensed unit. We found this SOC increases energy consumption with junction temperature by ∼0.5%/K over large temperature rise and ∼4%/K at around 333 K (60 °C), having implications for computational energy efficiency versus chip temperature considering advanced nodes have larger leakage current.

Förderung

  • Binghamton University
  • National Science Foundation
  • Semiconductor Research Corporation

Zitieren

APA

Kulkarni, P., Zhang, Z., Sammakia, B., & Schiffres, S. (2026). Novel Method for Power Consumption-Based Temperature Sensing in System on Chip Device. Journal of Electronic Packaging, 148(2). https://doi.org/10.1115/1.4072236

Vancouver

Kulkarni P, Zhang Z, Sammakia B, Schiffres S. Novel Method for Power Consumption-Based Temperature Sensing in System on Chip Device. Journal of Electronic Packaging. 2026;148(2). doi:10.1115/1.4072236

BibTeX
@article{Kulkarni2026,
  author = {Kulkarni, Piyush and Zhang, Zechen and Sammakia, Bahgat and Schiffres, Scott},
  title = {Novel Method for Power Consumption-Based Temperature Sensing in System on Chip Device},
  journal = {Journal of Electronic Packaging},
  year = {2026},
  volume = {148},
  number = {2},
  doi = {10.1115/1.4072236}
}
Kostenlos starten →