EUVIMEDEUVIMED entdecken
Crossref

Reduced-Order Modeling of Elastomer-Based Constant-Flow Regulators With Experimental Validation

Ievgen Mochalin, Zhengpeng Yang, Yuping Fang, Jiancheng Cai, Leimin Wang

Journal of Fluids Engineering · 01.11.2026 · 148 (11)

DOI: 10.1115/1.4072223 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Fluids Engineering, online erschienen am 15.07.2026. Verfasst von Ievgen Mochalin und 4 weiteren Autor:innen. Die Arbeit nennt 42 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Constant-flow regulators are widely used in compact hydraulic systems to maintain stable flow rates under varying supply pressures. In elastomer-based regulators, pressure-induced deformation of a compliant element modifies the effective throttling area and thereby regulates hydraulic resistance. Predictive modeling of this behavior is challenging because the coupled deformation–flow process involves geometric nonlinearity, pressure-dependent contact conditions, and evolving flow restriction geometry. This study presents an experimentally calibrated reduced-order model for predicting the flow–pressure characteristics of elastomer-based constant-flow regulators used in solenoid inlet valves. The formulation combines an orifice-based hydraulic representation with a lumped-parameter energy model of elastomer deformation that determines discrete pillar loading configurations governing the effective throttling gap geometry. The deformation of the elastomer element is represented by equivalent indentation and tensile stiffness parameters identified through targeted experiments using a single adjustable regulator specimen. The modeling framework is applied to determine the pillar height configuration required to achieve a target flowrate of 7 L/min over an operating pressure range of 1–10 bar. Model predictions agree with experimental measurements within ±5% across the regulation regime. The proposed reduced-order formulation provides a computationally efficient alternative to detailed CFD–FEM simulations for engineering analysis and design of elastomer-based passive flow regulators.

Zitieren

APA

Mochalin, I., Yang, Z., Fang, Y., Cai, J., & Wang, L. (2026). Reduced-Order Modeling of Elastomer-Based Constant-Flow Regulators With Experimental Validation. Journal of Fluids Engineering, 148(11). https://doi.org/10.1115/1.4072223

Vancouver

Mochalin I, Yang Z, Fang Y, Cai J, Wang L. Reduced-Order Modeling of Elastomer-Based Constant-Flow Regulators With Experimental Validation. Journal of Fluids Engineering. 2026;148(11). doi:10.1115/1.4072223

BibTeX
@article{Mochalin2026,
  author = {Mochalin, Ievgen and Yang, Zhengpeng and Fang, Yuping and Cai, Jiancheng and Wang, Leimin},
  title = {Reduced-Order Modeling of Elastomer-Based Constant-Flow Regulators With Experimental Validation},
  journal = {Journal of Fluids Engineering},
  year = {2026},
  volume = {148},
  number = {11},
  doi = {10.1115/1.4072223}
}
Kostenlos starten →