EUVIMEDEUVIMED entdecken
Crossref

Impact of Moisture Content and Exposure Duration on the Performance of Atomic Layer Deposition-Alumina/Yttria-Stabilized Zirconia Thermal Barrier Coatings

Ziyang Shen, Vichaksha Ponnamperuma, Zhongdong Liang, Bao Yang, Ashwani K. Gupta

Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy · 01.08.2026 · 2 (8)

DOI: 10.1115/1.4072219 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy, online erschienen am 16.07.2026. Verfasst von Ziyang Shen und 4 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study systematically investigates the influence of moisture content (10.5–44.0%) and exposure duration (up to 180 min) on the performance of monolithic yttria-stabilized zirconia (YSZ) and bilayer alumina/YSZ thermal barrier coatings. A dense 100-nm alumina top layer, deposited via atomic layer deposition (ALD), was integrated as a potent diffusion barrier to suppress interfacial oxidation. Both the monolithic YSZ baseline and the bilayer alumina/YSZ samples were subjected to 1500 K in a custom-designed tube furnace replicating hydrogen-enriched combustion conditions. Experimental results demonstrated that the ALD-alumina layer significantly inhibited interfacial oxide growth by restricting ion transport. Notably, at 10.5% moisture content, the bilayer alumina/YSZ system limited interfacial oxide growth to just 35 nm after 45 min of exposure, whereas the monolithic baseline reached 320 nm. Furthermore, the bilayer alumina/YSZ system exhibited negligible interfacial growth during initial exposure (<30 min), even as moisture contents increased to 36.1%. However, this protective efficacy is time- and moisture-dependent. After 180 min of exposure, the interfacial layer growth for both configurations converged to approximately 1.05 µm, regardless of moisture content. This degradation is likely driven by alumina volatilization as aluminum hydroxide when exposed to high-temperature water vapor or its diffusion into the YSZ layer, which increases the system's overall ionic conductivity. This work provides critical insights into moisture-driven degradation kinetics and identifies key challenges in designing robust thermal barrier coatings for extreme, high-moisture environments.

Zitieren

APA

Shen, Z., Ponnamperuma, V., Liang, Z., Yang, B., & Gupta, A. K. (2026). Impact of Moisture Content and Exposure Duration on the Performance of Atomic Layer Deposition-Alumina/Yttria-Stabilized Zirconia Thermal Barrier Coatings. Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy, 2(8). https://doi.org/10.1115/1.4072219

Vancouver

Shen Z, Ponnamperuma V, Liang Z, Yang B, Gupta AK. Impact of Moisture Content and Exposure Duration on the Performance of Atomic Layer Deposition-Alumina/Yttria-Stabilized Zirconia Thermal Barrier Coatings. Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy. 2026;2(8). doi:10.1115/1.4072219

BibTeX
@article{Shen2026,
  author = {Shen, Ziyang and Ponnamperuma, Vichaksha and Liang, Zhongdong and Yang, Bao and Gupta, Ashwani K.},
  title = {Impact of Moisture Content and Exposure Duration on the Performance of Atomic Layer Deposition-Alumina/Yttria-Stabilized Zirconia Thermal Barrier Coatings},
  journal = {Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy},
  year = {2026},
  volume = {2},
  number = {8},
  doi = {10.1115/1.4072219}
}
Kostenlos starten →