EUVIMEDEUVIMED entdecken
Crossref

Effect of Ferrite Content, Cr/Ni Equivalence Ratio on Residual Stress and Microhardness of SS316L WAAM

Sudeep Kumar Jain, Nathi Ram Chauhan, Sharad Kumar Pradhan

Journal of Engineering Materials and Technology · 01.10.2026 · 148 (4)

DOI: 10.1115/1.4072207 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Engineering Materials and Technology, online erschienen am 01.07.2026. Verfasst von Sudeep Kumar Jain und 2 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study characterizes the microstructural evolution and coupled mechanical response along the build height of the SS316L wire arc additive manufacturing (WAAM). Correlation between elemental segregation, solidification mode, ferrite content, microhardness, and residual stress at top, middle, and bottom regions. A progressively Creq/Nieq ratio (1.31–1.75) toward the bottom region altered the solidification pathway from primarily austenitic in the top to an austenitic-ferrite mode at the middle and ferrite-stabilized solidification in the bottom region. This shift corresponds with ferrite number increases from ∼1 to ∼9 and a residual stress transition from tensile stress (80 ± 2 MPa) and lower hardness (216 ± 1.0 HV0.5) at the top to high compressive stress (220 ± 3 MPa) and high hardness (270 ± 2.5 HV0.5) near the substrate. Microstructural observations confirmed this gradient with finer cellular austenite evolving into a mixed dendritic columnar structure containing lathy, skeletal, and vermicular δ-ferrite. The results demonstrate that thermal history and solute redistribution inherently produce a functionally graded microstructure and property profile in SS316L WAAM.

Zitieren

APA

Jain, S. K., Chauhan, N. R., & Pradhan, S. K. (2026). Effect of Ferrite Content, Cr/Ni Equivalence Ratio on Residual Stress and Microhardness of SS316L WAAM. Journal of Engineering Materials and Technology, 148(4). https://doi.org/10.1115/1.4072207

Vancouver

Jain SK, Chauhan NR, Pradhan SK. Effect of Ferrite Content, Cr/Ni Equivalence Ratio on Residual Stress and Microhardness of SS316L WAAM. Journal of Engineering Materials and Technology. 2026;148(4). doi:10.1115/1.4072207

BibTeX
@article{Jain2026,
  author = {Jain, Sudeep Kumar and Chauhan, Nathi Ram and Pradhan, Sharad Kumar},
  title = {Effect of Ferrite Content, Cr/Ni Equivalence Ratio on Residual Stress and Microhardness of SS316L WAAM},
  journal = {Journal of Engineering Materials and Technology},
  year = {2026},
  volume = {148},
  number = {4},
  doi = {10.1115/1.4072207}
}
Kostenlos starten →