EUVIMEDEUVIMED entdecken
Crossref

Effects of Partial Foam Metal Casing Treatment on Fan Stability

Xu Dong, Hanze Liu, Jia Li, Ming Zhang, Dakun Sun, Xiaofeng Sun

Journal of Turbomachinery · 01.08.2026 · 148 (8)

DOI: 10.1115/1.4072204 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 10.07.2026. Verfasst von Xu Dong und 5 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The application of casing treatments is a widely recognized method for improving the stall margin of fans and compressors. However, dimensional constraints in modern aero-engines, particularly in designs with S-duct or boundary-layer ingesting inlets, limit the use of treatments requiring bulky auxiliary structures. This article investigates the effectiveness of a circumferentially partial foam metal casing treatment (PFMCT) combined with an adjacent circumferential cavity. The study is conducted experimentally on a low-speed, single-stage axial flow fan under both uniform and distorted inlet conditions. The effects of varying the circumferential coverage of the foam metal and the influence of the relative angular position between the PFMCT and a 180-degree inlet distortion are systematically examined. Results indicate that PFMCT provides a significant stall margin improvement, which is further enhanced by the presence of the circumferential cavity, especially under uniform inflow. Unlike full-annulus casing treatments, especially the ones with annulus back-chamber, the partial configurations do not alter the inherent spike-type stall inception of the fan. The stabilization mechanism is attributed to two distinct functions: the foam metal section is primarily responsible for dissipating unsteady disturbance energy and redistributing rotor loading, while the circumferential cavity contributes by achieving a more uniform steady-state circumferential loading distribution. Furthermore, stability enhancement is shown to be highly sensitive to the relative circumferential position of the casing treatment and the inlet distortion zone. An optimal alignment is identified where the high-loading region induced by the distortion directly interacts with the cavity, maximizing the load-averaging effect and thereby achieving the greatest improvement in stall margin.

Zitieren

APA

Dong, X., Liu, H., Li, J., Zhang, M., Sun, D., & Sun, X. (2026). Effects of Partial Foam Metal Casing Treatment on Fan Stability. Journal of Turbomachinery, 148(8). https://doi.org/10.1115/1.4072204

Vancouver

Dong X, Liu H, Li J, Zhang M, Sun D, Sun X. Effects of Partial Foam Metal Casing Treatment on Fan Stability. Journal of Turbomachinery. 2026;148(8). doi:10.1115/1.4072204

BibTeX
@article{Dong2026,
  author = {Dong, Xu and Liu, Hanze and Li, Jia and Zhang, Ming and Sun, Dakun and Sun, Xiaofeng},
  title = {Effects of Partial Foam Metal Casing Treatment on Fan Stability},
  journal = {Journal of Turbomachinery},
  year = {2026},
  volume = {148},
  number = {8},
  doi = {10.1115/1.4072204}
}
Kostenlos starten →