EUVIMEDEUVIMED entdecken
Crossref

Conformal Contact of Silicon Thin Film to Spherical Substrate Driven by PDMS Soft Punch for Curvy Electronics

Xu Cheng, Hongyan Fan, Yin Huang, Ying Chen

Journal of Applied Mechanics · 01.08.2026 · 93 (8)

DOI: 10.1115/1.4072159 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Mechanics, online erschienen am 06.07.2026. Verfasst von Xu Cheng und 3 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Zhejiang Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Three-dimensional surface-conformable electronics hold great promise for curved displays, bioelectronics, and biomimetic devices. However, achieving full conformal contact of planar electronics to nondevelopable surfaces such as spheres remains a major challenge. This article presents numerical simulations demonstrating that a polydimethylsiloxane (PDMS) soft punch enables a silicon thin film to conform to a spherical rigid substrate through four stages: initial contact, instability initiation, instability evolution and dynamic adaptation, and wrinkle disappearance and full contact. By exciting higher-order buckling modes (mode refinement), the system achieves cooperative deformation and dynamic adaptation among the punch, film, and substrate, leading to complete contact. Two dimensionless parameters are introduced: L/h for characterizing the film's bending resistance and L/(2ρ) for characterizing geometric mismatch between the film and the substrate. A phase diagram constructed from the two parameters maps three distinct instability modes. When both parameters are small, the film exhibits high bending stiffness and low mismatch, with instability confined to the four corners (corner-localized instability). As the parameters increase, bending stiffness weakens and mismatch intensifies, causing instability to expand from the corners to the edges (peripheral instability). At sufficiently high parameter values, the film develops global complex instability involving both the center and periphery (dual-zone instability). This study provides theoretical guidance and quantitative reference for the process design of three-dimensional surface-conformable electronics.

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Zhejiang Province

Zitieren

APA

Cheng, X., Fan, H., Huang, Y., & Chen, Y. (2026). Conformal Contact of Silicon Thin Film to Spherical Substrate Driven by PDMS Soft Punch for Curvy Electronics. Journal of Applied Mechanics, 93(8). https://doi.org/10.1115/1.4072159

Vancouver

Cheng X, Fan H, Huang Y, Chen Y. Conformal Contact of Silicon Thin Film to Spherical Substrate Driven by PDMS Soft Punch for Curvy Electronics. Journal of Applied Mechanics. 2026;93(8). doi:10.1115/1.4072159

BibTeX
@article{Cheng2026,
  author = {Cheng, Xu and Fan, Hongyan and Huang, Yin and Chen, Ying},
  title = {Conformal Contact of Silicon Thin Film to Spherical Substrate Driven by PDMS Soft Punch for Curvy Electronics},
  journal = {Journal of Applied Mechanics},
  year = {2026},
  volume = {93},
  number = {8},
  doi = {10.1115/1.4072159}
}
Kostenlos starten →