Design and Modeling of a Topology-Morphing Spherical Mechanism With Mobility and Compliance Switching
Journal of Mechanical Design · 01.08.2026 · 148 (8)
DOI: 10.1115/1.4072146 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Mechanical Design, online erschienen am 17.07.2026. Verfasst von Yen-Hua Lin und 2 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Gefördert von: Ministry of Science and Technology, Taiwan.
Themen: Mobilisation
Abstract (Originalsprache)
Remote center-of-motion (RCM) mechanisms are widely used in robotic palms and wrists, orientation platforms, and medical devices. A spherical mechanism provides a compact RCM realization by enforcing the intersection of all joint axes at a common center. This article introduces a topology-morphing 7R spherical mechanism that switches from a single-loop configuration with compliant motion into a double-loop spherical scissors configuration with substantially increased stiffness. The architecture is modeled using a graph-based description in which the mobility is expressed as a function of the number of links, holes, and tails. A unified kinematic and static formulation is then derived for both topology modes using a consistent joint coordinate set and Jacobian structure. Reconfiguration conditions are established from the pinhole coincidence constraints, and an algorithm is provided to compute admissible reconfiguration configurations. The reachable orientation workspace and manipulability are evaluated by sampling on the unit sphere. Under identical end-effector loading (0–2N), rigid-body simulation predicts an equivalent stiffness increase from 0.3N/mm to 571N/mm. Prototype experiments further confirm compliance with rigid switching, with stiffness increasing from 0.106N/mm to 0.525N/mm. These results indicate that topology-morphing on the sphere can provide a compact mechanism-level strategy for switching mobility and effective stiffness under the same actuation scheme.
Förderung
- Ministry of Science and Technology, Taiwan
Zitieren
APA
Lin, Y., Chou, T. W., & Wu, G. (2026). Design and Modeling of a Topology-Morphing Spherical Mechanism With Mobility and Compliance Switching. Journal of Mechanical Design, 148(8). https://doi.org/10.1115/1.4072146
Vancouver
Lin Y, Chou TW, Wu G. Design and Modeling of a Topology-Morphing Spherical Mechanism With Mobility and Compliance Switching. Journal of Mechanical Design. 2026;148(8). doi:10.1115/1.4072146
BibTeX
@article{Lin2026,
author = {Lin, Yen-Hua and Chou, Ting Wei and Wu, Guan-Zhong},
title = {Design and Modeling of a Topology-Morphing Spherical Mechanism With Mobility and Compliance Switching},
journal = {Journal of Mechanical Design},
year = {2026},
volume = {148},
number = {8},
doi = {10.1115/1.4072146}
}
EUVIMED