EUVIMEDEUVIMED entdecken
Crossref

Microwave-Induced Low-Temperature Plasma Drilling of Borosilicate Glass: Effects of Metallic Concentrators and Target Preheating

Parvej, Apurbba Kumar Sharma

Journal of Manufacturing Science and Engineering · 01.09.2026 · 148 (9)

DOI: 10.1115/1.4072144 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing Science and Engineering, online erschienen am 30.06.2026. Verfasst von Parvej und 1 weiteren Autor:innen. Die Arbeit nennt 49 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the present study, the influence of preheating and metallic concentrators on drilling characteristics of borosilicate glass was investigated under microwave irradiation at 2.45 GHz. An integrated approach of experimental trials and numerical simulation was employed to examine how preheating of the target affects thermal gradients, plasma generation, hole quality, and process economy. Four metallic concentrators—copper, low-carbon steel, Ni-plated steel, and nichrome were used under ordinary and preheated drilling conditions. A 3D COMSOL Multiphysics model was developed to simulate the electric field distribution and temperature gradients during the preheating stage. A model-based optimization framework based on input–response was developed using nondominated sorting genetic algorithm II (NSGA-II). Results revealed that target preheating significantly reduced the heat-affected zone by minimizing sharp thermal gradients, which in turn improved hole circularity and reduced diametrical overcut. Variation in plasma discharge behavior was observed with the free electron density (thermal and electrical properties) of each concentrator; copper exhibited the most intense plasma, while the nichrome generated minimal discharge due to its low conductivity. High thermal conductivity concentrators, such as copper and low-carbon steel, experienced tip melting due to uncontrolled plasma heat transfer, whereas Ni-plated steel suffered localized tip burning and nichrome remained as the least damaged. Quantitative assessment confirmed that preheating enhanced drilling efficiency, producing cleaner holes with fewer defects and more uniform geometry. Additionally, analysis revealed that copper and Ni-plated steel concentrators resulted in shorter drilling time and reduced energy consumption compared to low-carbon steel and nichrome concentrators.

Zitieren

APA

Parvej, & Sharma, A. K. (2026). Microwave-Induced Low-Temperature Plasma Drilling of Borosilicate Glass: Effects of Metallic Concentrators and Target Preheating. Journal of Manufacturing Science and Engineering, 148(9). https://doi.org/10.1115/1.4072144

Vancouver

Parvej, Sharma AK. Microwave-Induced Low-Temperature Plasma Drilling of Borosilicate Glass: Effects of Metallic Concentrators and Target Preheating. Journal of Manufacturing Science and Engineering. 2026;148(9). doi:10.1115/1.4072144

BibTeX
@article{Parvej2026,
  author = {Parvej and Sharma, Apurbba Kumar},
  title = {Microwave-Induced Low-Temperature Plasma Drilling of Borosilicate Glass: Effects of Metallic Concentrators and Target Preheating},
  journal = {Journal of Manufacturing Science and Engineering},
  year = {2026},
  volume = {148},
  number = {9},
  doi = {10.1115/1.4072144}
}
Kostenlos starten →