EUVIMEDEUVIMED entdecken
Crossref

Ultrasonic Polishing of Zirconia Ceramics Based on a Fresnel-Structured Transducer

Sisi Li, Mengkuan Zhao, Xianglei Zhang, Zhixiang Chen, Ming Feng, Hanqiang Wu

Journal of Manufacturing Science and Engineering · 01.09.2026 · 148 (9)

DOI: 10.1115/1.4072141 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing Science and Engineering, online erschienen am 30.06.2026. Verfasst von Sisi Li und 5 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Zirconia (ZrO2) ceramics are widely used in 5G-enabled devices owing to their excellent performance. However, their high hardness and brittleness during ultrasonic polishing lead to complex behavior that is influenced by the setup and abrasive size. This study presents Fresnel-structured transducer (FST)-based ultrasonic polishing (FSTUP), which employs a Fresnel-structured transducer into ultrasonic polishing to enhance the surface quality and material removal rate (MRR) of ZrO2 ceramics. The improved polishing performance is attributed to the combined effects of acoustic streaming, abrasive impact, and cavitation collapse. Cavitation collapse leads to surface erosion, thereby decreasing surface quality, unlike the other two methods. Therefore, it is essential to control this phenomenon. We investigated the effects of transducer structure, polishing distance, and abrasive particle size on the surface roughness (Ra) and MRR of ZrO2 ceramics. White light interferometry and laser confocal microscopy were used to characterize surface morphologies, and comsol simulations were performed to verify the sound field focusing capability of the FST. Under the optimized conditions (polishing distance D = 1.5 mm, abrasive size A = 2.5 µm, and polishing time T = 30 min), we obtained an Ra of 5.22 nm and an MRR of 6.45 nm/min. This research is applied to the polishing processing of 5G device back covers.

Zitieren

APA

Li, S., Zhao, M., Zhang, X., Chen, Z., Feng, M., & Wu, H. (2026). Ultrasonic Polishing of Zirconia Ceramics Based on a Fresnel-Structured Transducer. Journal of Manufacturing Science and Engineering, 148(9). https://doi.org/10.1115/1.4072141

Vancouver

Li S, Zhao M, Zhang X, Chen Z, Feng M, Wu H. Ultrasonic Polishing of Zirconia Ceramics Based on a Fresnel-Structured Transducer. Journal of Manufacturing Science and Engineering. 2026;148(9). doi:10.1115/1.4072141

BibTeX
@article{Li2026,
  author = {Li, Sisi and Zhao, Mengkuan and Zhang, Xianglei and Chen, Zhixiang and Feng, Ming and Wu, Hanqiang},
  title = {Ultrasonic Polishing of Zirconia Ceramics Based on a Fresnel-Structured Transducer},
  journal = {Journal of Manufacturing Science and Engineering},
  year = {2026},
  volume = {148},
  number = {9},
  doi = {10.1115/1.4072141}
}
Kostenlos starten →