EUVIMEDEUVIMED entdecken
Crossref

A Novel Gradual Expansion Convergence Hole Flow Conditioner Design to Eliminate Eccentric Jet Flow in an Ultra-High-Pressure Angle Valve

Yuding Zhang, Haoyang Li, Hanan Lu, Qiushi Li

Journal of Fluids Engineering · 01.10.2026 · 148 (10)

DOI: 10.1115/1.4072131 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Fluids Engineering, online erschienen am 03.07.2026. Verfasst von Yuding Zhang und 3 weiteren Autor:innen. Die Arbeit nennt 26 Literaturangaben. Gefördert von: Natural Science Foundation of Beijing Municipality.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ultra-high-pressure angle valves are critical components applied in hypersonic wind tunnels for precise regulation of pressure and mass flow, which greatly influences the downstream flow uniformity and measurement accuracy. Under ultra-high-pressure operating conditions, where the inlet-to-outlet pressure difference can reach up to 100 MPa in practical applications, the internal flow enters a strongly inertia-dominated regime with a Reynolds number of the order of 107. The accompanying highly nonuniform pressure gradients unavoidably drive a violent, inertia-controlled, off-axis high-speed jet. Such jets can cause severe localized erosion in downstream piping, markedly shortening valve service life, and they also induce persistent outlet-flow nonuniformity that degrades downstream measurement accuracy. Traditional eccentric-jet mitigation approaches for low-pressure flow-to-open angle valves prove insufficient in ultra-high-pressure valves. To address this limitation, a novel gradual expansion convergence hole flow conditioner is proposed to convert the unstable eccentric jet into stabilized flow within a much shorter outlet-pipe length. Single-factor investigations of four key geometric parameters indicate that the gradual expansion holes enhance entrainment, actively drawing the biased jet toward the orifice center, while the convergent angle promotes cross-stream mixing and suppresses wake formation. The synergistic action of these mechanisms enables efficient jet rectification even under strongly inertia-dominated conditions. An optimization design is further implemented using an orthogonal design. For the optimized design, the target thresholds of velocity-uniformity coefficient (Cs) >85% and flow-direction uniformity coefficient (Cθ) >90% are achieved as early as three outlet-pipe diameters downstream of the valve spool (X = 3D). At X = 3D, the Cs = 89.2% and the Cθ = 93.4% corresponding to improvements of 18.91% and 14.36% relative to the prototype valve without flow conditioner and 6.86% and 5.81% relative to the conventional Laws flow conditioner. Moreover, at the downstream length of X = 13D, Cs, and Cθ further increase to 96.02% and 99.2%, respectively, demonstrating the strong far-field rectification capability of the proposed design. It could provide certain theoretical guidance for advanced design of a compact ultra-high-pressure angle valve with long service life and high reliability.

Förderung

  • Natural Science Foundation of Beijing Municipality

Zitieren

APA

Zhang, Y., Li, H., Lu, H., & Li, Q. (2026). A Novel Gradual Expansion Convergence Hole Flow Conditioner Design to Eliminate Eccentric Jet Flow in an Ultra-High-Pressure Angle Valve. Journal of Fluids Engineering, 148(10). https://doi.org/10.1115/1.4072131

Vancouver

Zhang Y, Li H, Lu H, Li Q. A Novel Gradual Expansion Convergence Hole Flow Conditioner Design to Eliminate Eccentric Jet Flow in an Ultra-High-Pressure Angle Valve. Journal of Fluids Engineering. 2026;148(10). doi:10.1115/1.4072131

BibTeX
@article{Zhang2026,
  author = {Zhang, Yuding and Li, Haoyang and Lu, Hanan and Li, Qiushi},
  title = {A Novel Gradual Expansion Convergence Hole Flow Conditioner Design to Eliminate Eccentric Jet Flow in an Ultra-High-Pressure Angle Valve},
  journal = {Journal of Fluids Engineering},
  year = {2026},
  volume = {148},
  number = {10},
  doi = {10.1115/1.4072131}
}
Kostenlos starten →