Combustion Modeling and In-Cylinder Fuel Distribution in a Gasoline Compression Ignition Engine at Varying Speeds
Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy · 01.12.2026 · 2 (12)
DOI: 10.1115/1.4072123 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy, online erschienen am 28.10.2026. Verfasst von M. Krishnamoorthi und 1 weiteren Autor:innen. Die Arbeit nennt 58 Literaturangaben.
Abstract (Originalsprache)
The advanced compression ignition and lean-burn capabilities of a gasoline compression ignition (GCI) engine result in higher thermal efficiency, making it a promising technology choice for the next-generation vehicles. Studies show that gasoline-diesel blend-fueled GCI engines produce lower nitrogen oxides (NOx) and soot emissions. There is significant interest in the automotive industry in using GCI combustion engines for heavy-duty vehicles; however, this combustion mode needs to be better understood through experimental and simulation studies. Simulation techniques help understand the in-cylinder fluid flow and combustion dynamics observed in the experimental results. This work aims to model GCI combustion over a range of engine speeds (1500–2500 rpm) and to validate the model against experimental results at a 5-bar brake mean effective pressure (BMEP) engine load. A triple-injection strategy, exhaust gas recirculation (EGR), and preheated intake air were employed to achieve GCI combustion in the test engine. The effect of a narrow-angle injector was investigated to control the wall impingement of the test fuel. The simulation results revealed that the fuel parcels from pilot injections caused wall wetting, while others were trapped in the squish regions. Most fuel droplets evaporated before the combustion onset, supporting the concept of partially premixed combustion. The narrow injection angle of the fuel spray directed more fuel into the piston bowl, reducing the combustion efficiency.
Zitieren
APA
Krishnamoorthi, M., & Agarwal, A. K. (2026). Combustion Modeling and In-Cylinder Fuel Distribution in a Gasoline Compression Ignition Engine at Varying Speeds. Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy, 2(12). https://doi.org/10.1115/1.4072123
Vancouver
Krishnamoorthi M, Agarwal AK. Combustion Modeling and In-Cylinder Fuel Distribution in a Gasoline Compression Ignition Engine at Varying Speeds. Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy. 2026;2(12). doi:10.1115/1.4072123
BibTeX
@article{Krishnamoorthi2026,
author = {Krishnamoorthi, M. and Agarwal, Avinash Kumar},
title = {Combustion Modeling and In-Cylinder Fuel Distribution in a Gasoline Compression Ignition Engine at Varying Speeds},
journal = {Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy},
year = {2026},
volume = {2},
number = {12},
doi = {10.1115/1.4072123}
}
EUVIMED