Thermal Efficiency and Emissions of a Commercial Vehicle Hybrid-Dedicated Diesel Engine With Miller/Atkinson Cycle and High Compression Ratio: An Experimental Study
Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy · 01.08.2026 · 2 (8)
DOI: 10.1115/1.4072122 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy, online erschienen am 18.06.2026. Verfasst von Rui Wang und 5 weiteren Autor:innen. Die Arbeit nennt 44 Literaturangaben.
Abstract (Originalsprache)
To address energy security and global environmental challenges, this study conducted bench tests to enhance the thermal efficiency of commercial vehicle hybrid-dedicated diesel engines, developing powertrain systems with high fuel economy and competitive total cost of ownership. Focusing on key conditions for thermal efficiency optimization, this study employed the Miller/Atkinson cycle and high compression ratio configurations. Through experimental and thermodynamic analyses, the study investigated how effective compression ratio (ECR) influences combustion processes and emission characteristics, proposing a technical route to improve thermal efficiency under limited peak cylinder pressure. Experimental results demonstrated that ECR modifications effectively regulate the in-cylinder thermal environment, with reduced temperature and pressure providing margin for advancing the start of injection, thereby minimizing combustion losses. Without a significant increase in nitrogen oxide emissions relative to the baseline, the late intake valve closing strategy, combined with a high geometric compression ratio, significantly reduced soot emissions at low load. Compared to the baseline, large soot particles are reduced by over 85%. The increased expansion ratio improved thermal-work conversion efficiency while reducing pumping losses, resulting in an approximately 1.2% increase in the maximum theoretical thermal efficiency. The maximum brake thermal efficiency of the optimized diesel engine increased by 2.5%, and the minimum brake specific fuel consumption (BSFC) dropped from 192.6 g/(kW · h) to 187.5 g/(kW · h). Furthermore, the BSFC under low-load conditions was significantly reduced by over 10 g/(kW · h).
Zitieren
APA
Wang, R., Wang, X., Lin, Z., Wang, H., Wang, X., & Lu, Y. (2026). Thermal Efficiency and Emissions of a Commercial Vehicle Hybrid-Dedicated Diesel Engine With Miller/Atkinson Cycle and High Compression Ratio: An Experimental Study. Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy, 2(8). https://doi.org/10.1115/1.4072122
Vancouver
Wang R, Wang X, Lin Z, Wang H, Wang X, Lu Y. Thermal Efficiency and Emissions of a Commercial Vehicle Hybrid-Dedicated Diesel Engine With Miller/Atkinson Cycle and High Compression Ratio: An Experimental Study. Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy. 2026;2(8). doi:10.1115/1.4072122
BibTeX
@article{Wang2026,
author = {Wang, Rui and Wang, Xiaosa and Lin, Zhiqiang and Wang, Hu and Wang, Xiaohui and Lu, Yao},
title = {Thermal Efficiency and Emissions of a Commercial Vehicle Hybrid-Dedicated Diesel Engine With Miller/Atkinson Cycle and High Compression Ratio: An Experimental Study},
journal = {Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy},
year = {2026},
volume = {2},
number = {8},
doi = {10.1115/1.4072122}
}
EUVIMED