An In Vitro Experimental Model for Investigating Aortic Pressure Dynamics Under Blunt Thoracic Impacts
Journal of Biomechanical Engineering · 01.09.2026 · 148 (9)
DOI: 10.1115/1.4072112 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Biomechanical Engineering, online erschienen am 24.06.2026. Verfasst von Ghassan Maraouch und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Industrial and Aerospace Engineering, Concordia University, 1455 de Maisonneuve Building West, Montreal, QC H3G 1M8, Canada. Hauptthemen laut MEDLINE: Wounds, Nonpenetrating, Arterial Pressure, Aorta, Thoracic Injuries. Die Arbeit nennt 27 Literaturangaben. Gefördert von: Natural Sciences and Engineering Research Council of Canada.
Abstract (Originalsprache)
Blunt traumatic aortic rupture (BTAR) is a life-threatening injury that can occur in high-impact events such as motor vehicle collisions, falls, and sports-related trauma involving the thorax. Despite improvements in vehicle safety features and regulations by using anthropometric test devices, BTAR remains associated with substantial clinical severity and high mortality, and its underlying rupture mechanisms are still poorly understood. We developed a novel proof of concept for a human-thorax surrogate for in vitro crash testing comprising a pulsatile heart pump, anatomically shaped silicone aorta, 3D-printed rib cage, and ballistic gel damping layer to investigate the fluid mechanics response to thoracic impact. The cardiovascular mock circulatory loop system of this surrogate was validated by obtaining physiological pressure waveforms with 120/80 mmHg of pressure and an average flowrate of 5.18 L/min. Subsequently, impacts were delivered to the sternum using a standardized pendulum system commonly employed in crash test dummy calibration. Impact severity was modulated by varying the pendulum's release height, corresponding to different kinetic energy levels. Instantaneous aortic pressure waveforms were recorded before, during, and after impact. The results demonstrate that thoracic impacts induce sharp, transient alterations in aortic pressure magnitude, with greater severity observed at higher energy levels, reaching a peak of aortic pressure of 287.01 mmHg. This experimental approach provides reproducible and physiologically relevant conditions for studying BTAR and offers valuable insights into the mechanisms underlying aortic rupture, which may guide the design of improved prevention and protection strategies.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical Industrial and Aerospace Engineering, Concordia University, 1455 de Maisonneuve Building West, Montreal, QC H3G 1M8, Canada.
- Concordia University.
- Department of Mechanical Industrial and Aerospace Engineering, Concordia University, Montreal, QC H3G 1M8, Canada.
Förderung
- Natural Sciences and Engineering Research Council of Canada
Zitieren
APA
Maraouch, G., Horton, C. H., Fanaberia, J., Malorni, E., Mignacca, G. C., Cohen, M., & Kadem, L. (2026). An In Vitro Experimental Model for Investigating Aortic Pressure Dynamics Under Blunt Thoracic Impacts. Journal of Biomechanical Engineering, 148(9). https://doi.org/10.1115/1.4072112
Vancouver
Maraouch G, Horton CH, Fanaberia J, Malorni E, Mignacca GC, Cohen M, et al. An In Vitro Experimental Model for Investigating Aortic Pressure Dynamics Under Blunt Thoracic Impacts. Journal of Biomechanical Engineering. 2026;148(9). doi:10.1115/1.4072112
BibTeX
@article{Maraouch2026,
author = {Maraouch, Ghassan and Horton, Curtis H and Fanaberia, Joseph and Malorni, Eduardo and Mignacca, Gian-Carlo and Cohen, Mark and Kadem, Lyes},
title = {An In Vitro Experimental Model for Investigating Aortic Pressure Dynamics Under Blunt Thoracic Impacts},
journal = {Journal of Biomechanical Engineering},
year = {2026},
volume = {148},
number = {9},
doi = {10.1115/1.4072112}
}
EUVIMED