EUVIMEDEUVIMED entdecken
Crossref

Research on the Tribological Properties and Wear Mechanism of Nitrided 38CrMoAl Steel/YL10.2 Cemented Carbide Tribo-Pair Under Impact-Sliding Drilling Conditions

Chenfan Liang, Yu Wang, Kai Zhang, Jixiu Wu, Lingrong Kong

Journal of Tribology · 01.10.2026 · 148 (10)

DOI: 10.1115/1.4072107 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Tribology, online erschienen am 18.06.2026. Verfasst von Chenfan Liang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 47 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The all-metal positive displacement motor (AMPDM) is a key downhole power tool for deep well drilling, but its service life is severely limited by wear from the synergy of stator–rotor impact-sliding, abrasive particles, and drilling fluid. Conventional studies fail to address this issue as they cannot replicate AMPDM's complex impact-sliding motion and multifactor coupled wear mechanisms. This study developed a multifunctional test system to simultaneously simulate impact-sliding motion and dynamic abrasive interactions in drilling fluid, and investigated the tribological performance of a novel nitrided 38CrMoAl steel/YL10.2 cemented carbide tribo-pair. The results show that the nitrided 38CrMoAl steel/YL10.2 cemented carbide pairing reduces the friction coefficient by 75% compared with the untreated 38CrMoAl steel/YL10.2 carbide pair under identical working conditions, demonstrating that the novel tribo-pair achieves substantially enhanced tribological performance. A critical load of 600 N was identified, at which contact pressure exceeds SiO2 abrasives' compressive strength, triggering wear mechanism evolution from mild rolling abrasive wear to severe abrasive wear that increases wear volume by 175% due to deep particle embedding, and finally to oxidative wear as abrasives fragment and a protective friction oxidation film forms. Additionally, aligning rotor surface texture with abrasive sliding direction significantly reduces wear volume compared to perpendicular orientation, providing a rotor design optimization criterion. This study clarifies the coupled effect of impact load and abrasives on AMPDM wear, offering engineering guidance to extend its lifespan in deep resource exploration.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Liang, C., Wang, Y., Zhang, K., Wu, J., & Kong, L. (2026). Research on the Tribological Properties and Wear Mechanism of Nitrided 38CrMoAl Steel/YL10.2 Cemented Carbide Tribo-Pair Under Impact-Sliding Drilling Conditions. Journal of Tribology, 148(10). https://doi.org/10.1115/1.4072107

Vancouver

Liang C, Wang Y, Zhang K, Wu J, Kong L. Research on the Tribological Properties and Wear Mechanism of Nitrided 38CrMoAl Steel/YL10.2 Cemented Carbide Tribo-Pair Under Impact-Sliding Drilling Conditions. Journal of Tribology. 2026;148(10). doi:10.1115/1.4072107

BibTeX
@article{Liang2026,
  author = {Liang, Chenfan and Wang, Yu and Zhang, Kai and Wu, Jixiu and Kong, Lingrong},
  title = {Research on the Tribological Properties and Wear Mechanism of Nitrided 38CrMoAl Steel/YL10.2 Cemented Carbide Tribo-Pair Under Impact-Sliding Drilling Conditions},
  journal = {Journal of Tribology},
  year = {2026},
  volume = {148},
  number = {10},
  doi = {10.1115/1.4072107}
}
Kostenlos starten →