EUVIMEDEUVIMED entdecken
Crossref

Experimental Study and Optimization of Wear–Corrosion Synergy in Silicon Carbide (SiC) and Tungsten Diselenide (WSe2)-Reinforced Al6061 Hybrid Composites Using the Taguchi Method

Vijayasarathi Prabakaran, M. Venkatasudhahar, S. Baskar, Ravikumar Jayabal, M. S. Malar Selvi, M. Karthikeyan, K. Aswin Shingaravel

Journal of Engineering Materials and Technology · 01.10.2026 · 148 (4)

DOI: 10.1115/1.4072067 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Engineering Materials and Technology, online erschienen am 06.07.2026. Verfasst von Vijayasarathi Prabakaran und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 42 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

AA6061-based hybrid aluminum matrix composites were successfully produced via stir casting. Al6061/7 wt% SiC/0.05 wt% WSe2 and Al6061/14 wt% SiC/0.1 wt% WSe2 were developed and then evaluated for mechanical, tribological, and corrosion properties. X-ray diffraction analysis confirmed the presence and uniform distribution of the reinforcement phases within the aluminum matrix. Mechanical test results showed a significant improvement in properties with an increase in reinforcement content. The hardness increased from about 105 HV to 121 HV. The yield strength and ultimate tensile strength were enhanced from 275 MPa and 310 MPa to 340 MPa and 395 MPa, respectively. Although ductility decreased, it represents a small trade-off compared to the considerable enhancement in strength and hardness. Under the study of dry sliding conditions, the wear-rate and coefficient of friction showed a significant reduction. In the case of the Al6061/14 wt% SiC/0.1 wt% WSe2 composite, the lowest wear-rate of about 1.90 × 10−4 mm3/N · m was observed. A transition in wear mechanism was also noted, from moderate adhesive wear in the less reinforced composites to mild abrasive wear in the more reinforced composites, leading to the formation of a stable tribolayer. Taguchi optimization and analysis of variance (ANOVA) results report that material composition is the primary factor influencing wear behavior, with a very high degree of accuracy (R2 = 99.73%), and contributing a dominant share of 64.51%. From the potentiodynamic polarization studies, a reduction in corrosion current density from 3.85 to 2.45 μA/cm2 was observed, indicating improved corrosion resistance with increasing reinforcement content. Overall, the hybrid composites exhibit excellent performance, making them a suitable choice for demanding engineering and automotive applications.

Zitieren

APA

Prabakaran, V., Venkatasudhahar, M., Baskar, S., Jayabal, R., Selvi, M. S. M., Karthikeyan, M., & Shingaravel, K. A. (2026). Experimental Study and Optimization of Wear–Corrosion Synergy in Silicon Carbide (SiC) and Tungsten Diselenide (WSe2)-Reinforced Al6061 Hybrid Composites Using the Taguchi Method. Journal of Engineering Materials and Technology, 148(4). https://doi.org/10.1115/1.4072067

Vancouver

Prabakaran V, Venkatasudhahar M, Baskar S, Jayabal R, Selvi MSM, Karthikeyan M, et al. Experimental Study and Optimization of Wear–Corrosion Synergy in Silicon Carbide (SiC) and Tungsten Diselenide (WSe2)-Reinforced Al6061 Hybrid Composites Using the Taguchi Method. Journal of Engineering Materials and Technology. 2026;148(4). doi:10.1115/1.4072067

BibTeX
@article{Prabakaran2026,
  author = {Prabakaran, Vijayasarathi and Venkatasudhahar, M. and Baskar, S. and Jayabal, Ravikumar and Selvi, M. S. Malar and Karthikeyan, M. and Shingaravel, K. Aswin},
  title = {Experimental Study and Optimization of Wear–Corrosion Synergy in Silicon Carbide (SiC) and Tungsten Diselenide (WSe2)-Reinforced Al6061 Hybrid Composites Using the Taguchi Method},
  journal = {Journal of Engineering Materials and Technology},
  year = {2026},
  volume = {148},
  number = {4},
  doi = {10.1115/1.4072067}
}
Kostenlos starten →