Research on the Optimized Design of Air–Water Source Coupling Heat Pump System
Journal of Thermal Science and Engineering Applications · 01.11.2026 · 18 (11)
DOI: 10.1115/1.4072004 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Thermal Science and Engineering Applications, online erschienen am 21.08.2026. Verfasst von Dongxiong Li und 5 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben.
Abstract (Originalsprache)
This study focuses on the “temperature slip” problem in an air–water source coupled heat pump (A–WSCHP) system caused by capacity mismatch between water source heat pump (WSHP) and air source heat pump (ASHP). The capacity ratio Ruc (ratio of the maximum heating capacity of ASHP to that of WSHP) is established as a key parameter. Its impact on the temperature slip phenomenon and the dynamic performance of the system during coupled operation is thoroughly analyzed. Based on the trnsys platform, a dynamic model of the heating system in a cold area (Taiyuan, Shanxi Province, 780 m2 building) is constructed, the water supply temperature in the middle loop is set at 25 °C, and the water supply temperature at the end is set at 50 °C, with the focus on comparing and analyzing the effect of Ruc in the 0.6–1.2 range. It is found that Ruc is the root cause of the phenomenon of “temperature slippage,” and its effect makes the middle tank temperature TINT significantly disturbed. In contrast, the hot water temperature TH has less impact. When Ruc = 1.0, the temperature slip phenomenon disappeared, but TINT fluctuation time needs to be further shortened. When designing the A–WSCHP system to select Ruc, the typical ambient temperature and the lowest ambient temperature during the heating period should be considered comprehensively, with priority given to the reference to the typical ambient temperature and focusing on considering the differences in the system under the low-temperature condition.
Zitieren
APA
Li, D., Yang, W., Ma, K., Zhao, J., Zhang, X., & Wang, P. (2026). Research on the Optimized Design of Air–Water Source Coupling Heat Pump System. Journal of Thermal Science and Engineering Applications, 18(11). https://doi.org/10.1115/1.4072004
Vancouver
Li D, Yang W, Ma K, Zhao J, Zhang X, Wang P. Research on the Optimized Design of Air–Water Source Coupling Heat Pump System. Journal of Thermal Science and Engineering Applications. 2026;18(11). doi:10.1115/1.4072004
BibTeX
@article{Li2026,
author = {Li, Dongxiong and Yang, Wenxu and Ma, Kai and Zhao, Jianlong and Zhang, Xueyou and Wang, Peng},
title = {Research on the Optimized Design of Air–Water Source Coupling Heat Pump System},
journal = {Journal of Thermal Science and Engineering Applications},
year = {2026},
volume = {18},
number = {11},
doi = {10.1115/1.4072004}
}
EUVIMED