Novel Robotic Control Methods That Account for System Compliance Decrease the Errors in Ligament Tensions Computed Using the Superposition Method
Journal of Biomechanical Engineering · 01.08.2026 · 148 (8)
DOI: 10.1115/1.4071973 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Biomechanical Engineering, online erschienen am 11.06.2026. Verfasst von Lesley R Lizalek und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomedical Engineering, University of Wisconsin - Madison, 1111 Highland Avenue Room 5059, Madison, WI 53706. Hauptthemen laut MEDLINE: Robotics, Ligaments, Materials Testing. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Superposition testing is a method to quantify in situ ligament tension by measuring the change in joint loads before and after ligament sectioning. Despite its widespread use, the traditional robot control method used in superposition testing may introduce errors because it does not account for system compliance when prescribing joint kinematics. Using the tibiofemoral joint as a model system, our objectives were to quantify the errors in superposition-computed tensions using both the traditional robot control method and a novel sensor fusion control method that accounts for system compliance. Using our industrial robotic testing system, we performed superposition testing to quantify lateral collateral ligament (LCL) tension in five cadaveric knees during prescribed varus and external rotation loading using both robot control and sensor fusion control. We computed the errors between superposition-computed tensions and reference standard ligament tensions measured by an in-series load cell. Compared to robot control, full sensor fusion control significantly decreased the errors in superposition-computed tensions in the lateral collateral ligament at peak tension under 15 N·m applied varus (from –92±30 N to –27±21 N) and 5 N·m applied external rotation (from –27±19 N to –10±9 N) loading by decreasing errors in joint kinematics and bone positions. Further work is needed to determine whether similar errors occur across different joints, ligaments, experimental setups, or applied loads. In applications where errors are unacceptable for a particular context of use, control methods that account for system compliance show promise for improving the accuracy of superposition-computed ligament tensions.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Autor:innen und Institutionen
- Department of Biomedical Engineering, University of Wisconsin - Madison, 1111 Highland Avenue Room 5059, Madison, WI 53706.
- University of Wisconsin System.
- Department of Orthopedics and Rehabilitation and Department of Mechanical Engineering, University of Wisconsin - Madison, 1111 Highland Avenue Room 5059, Madison, WI 53706.
ORCID-Profile: Lesley R Lizalek, Joshua D Roth
Zitieren
APA
Lizalek, L. R., & Roth, J. D. (2026). Novel Robotic Control Methods That Account for System Compliance Decrease the Errors in Ligament Tensions Computed Using the Superposition Method. Journal of Biomechanical Engineering, 148(8). https://doi.org/10.1115/1.4071973
Vancouver
Lizalek LR, Roth JD. Novel Robotic Control Methods That Account for System Compliance Decrease the Errors in Ligament Tensions Computed Using the Superposition Method. Journal of Biomechanical Engineering. 2026;148(8). doi:10.1115/1.4071973
BibTeX
@article{Lizalek2026,
author = {Lizalek, Lesley R and Roth, Joshua D},
title = {Novel Robotic Control Methods That Account for System Compliance Decrease the Errors in Ligament Tensions Computed Using the Superposition Method},
journal = {Journal of Biomechanical Engineering},
year = {2026},
volume = {148},
number = {8},
doi = {10.1115/1.4071973}
}
EUVIMED