EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Materials Removal Mechanism in Laser-Assisted Machining SiCp/Al Composites

Dongdong Xu, Zifu Shen, Liming Lei, Wei Zhang, Tianchen Ai, Zhirong Liao, Shusong Zan, Shuai Wang, Yiheng Chen, Xiaohai Peng

Journal of Manufacturing Science and Engineering · 01.07.2026 · 148 (7)

DOI: 10.1115/1.4071938 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing Science and Engineering, online erschienen am 01.06.2026. Verfasst von Dongdong Xu und 9 weiteren Autor:innen. Die Arbeit nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Silicon carbide particle-reinforced aluminum (SiCp/Al) metal matrix composites are widely employed in safety-critical areas, whereby their surface integrity is of high importance. Its machinability has been a significant challenge for industries to keep a desirable surface integrity, while laser-assisted machining (LAM) is a promising method to solve the problems. However, the material removal mechanism in LAM of SiCp/Al composite has not been fully revealed, especially the material reaction to the introduced laser thermal and chip formation, which restricts its further improvement in material removal rates and surface integrity. To fill in the gaps, the impact mechanisms of laser impact on the surface of silicon carbide–aluminum were investigated. Then, a self-designed cutting transient capture rig was designed to freeze the laser-assisted cutting process (quick-stop), which enables detailed studies of the thermally assisted phenomena, chip formation, and surface generation. New material removal mechanisms are revealed where only pull-out and push-in phenomena are found in laser-assisted scenarios, but conventional machining presents three kinds of conditions (pull-out, push-in, and particle break).

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Xu, D., Shen, Z., Lei, L., Zhang, W., Ai, T., Liao, Z., Zan, S., Wang, S., Chen, Y., & Peng, X. (2026). Materials Removal Mechanism in Laser-Assisted Machining SiCp/Al Composites. Journal of Manufacturing Science and Engineering, 148(7). https://doi.org/10.1115/1.4071938

Vancouver

Xu D, Shen Z, Lei L, Zhang W, Ai T, Liao Z, et al. Materials Removal Mechanism in Laser-Assisted Machining SiCp/Al Composites. Journal of Manufacturing Science and Engineering. 2026;148(7). doi:10.1115/1.4071938

BibTeX
@article{Xu2026,
  author = {Xu, Dongdong and Shen, Zifu and Lei, Liming and Zhang, Wei and Ai, Tianchen and Liao, Zhirong and Zan, Shusong and Wang, Shuai and Chen, Yiheng and Peng, Xiaohai},
  title = {Materials Removal Mechanism in Laser-Assisted Machining SiCp/Al Composites},
  journal = {Journal of Manufacturing Science and Engineering},
  year = {2026},
  volume = {148},
  number = {7},
  doi = {10.1115/1.4071938}
}
Kostenlos starten →