EUVIMEDEUVIMED entdecken
Crossref

Fracture/Fault Reactivation Determination and Carbon Storage Stability Analysis of CO2 Injection in Shale Reservoirs After Fracturing

Ying Wang, Ke Wu, Jiawei Cao, Siwei Chen, Zhaowei Chen, Chao Fang, Jihan Liu, Haozhen Zhang, Peng Tan

Journal of Energy Resources Technology, Part B: Subsurface Energy and Carbon Capture · 01.10.2026 · 2 (5)

DOI: 10.1115/1.4071859 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Energy Resources Technology, Part B: Subsurface Energy and Carbon Capture, online erschienen am 03.06.2026. Verfasst von Ying Wang und 8 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

CO2 Geological storage and enhanced oil recovery (CO2-EOR) are key pathways for the low-carbon energy transition. In fractured shale reservoirs, however, injection-induced pore-pressure buildup and stress redistribution may reduce fault stability and threaten storage safety. To quantitatively evaluate fault stability, this study develops a three-dimensional numerical model including injection wells, hydraulic fractures, and high-angle faults, incorporating CO2 adsorption–desorption effects. Fault slip tendency (ST) is adopted as the activation criterion to characterize fault-stability evolution. Sensitivity analyses are conducted for key engineering parameters, including injection rate, cumulative injection volume, injection location, fault–well distance, and fracture half-length. Grey relational analysis is used to identify the main controlling factors. Results demonstrate a pronounced nonlinear response of fault stability to injection parameters. Under the investigated scenarios, the maximum fault slip tendency varies from 0.35 to 0.91, and a warning threshold of ST = 0.8 is used to identify potential fault activation risk. Specifically, increasing the injection rate from 3000 to 12,000 m3/d raises the maximum ST from 0.60 to 0.91, while bottom injection yields a maximum ST of 0.81, higher than top injection (0.52) and middle injection (0.35). Increasing fracture half-length from 90 to 180 m raises the maximum ST from 0.45 to 0.81. Grey relational analysis shows that the relative influence of the investigated parameters is ranked as cumulative injection volume > injection location > fracture half-length > injection rate > fault–well distance.

Zitieren

APA

Wang, Y., Wu, K., Cao, J., Chen, S., Chen, Z., Fang, C., Liu, J., Zhang, H., & Tan, P. (2026). Fracture/Fault Reactivation Determination and Carbon Storage Stability Analysis of CO2 Injection in Shale Reservoirs After Fracturing. Journal of Energy Resources Technology, Part B: Subsurface Energy and Carbon Capture, 2(5). https://doi.org/10.1115/1.4071859

Vancouver

Wang Y, Wu K, Cao J, Chen S, Chen Z, Fang C, et al. Fracture/Fault Reactivation Determination and Carbon Storage Stability Analysis of CO2 Injection in Shale Reservoirs After Fracturing. Journal of Energy Resources Technology, Part B: Subsurface Energy and Carbon Capture. 2026;2(5). doi:10.1115/1.4071859

BibTeX
@article{Wang2026,
  author = {Wang, Ying and Wu, Ke and Cao, Jiawei and Chen, Siwei and Chen, Zhaowei and Fang, Chao and Liu, Jihan and Zhang, Haozhen and Tan, Peng},
  title = {Fracture/Fault Reactivation Determination and Carbon Storage Stability Analysis of CO2 Injection in Shale Reservoirs After Fracturing},
  journal = {Journal of Energy Resources Technology, Part B: Subsurface Energy and Carbon Capture},
  year = {2026},
  volume = {2},
  number = {5},
  doi = {10.1115/1.4071859}
}
Kostenlos starten →