Air Duct Design and Heat Dissipation Optimization for a 480-kW Charging Pile
Journal of Thermal Science and Engineering Applications · 01.10.2026 · 18 (10)
DOI: 10.1115/1.4071794 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Thermal Science and Engineering Applications, online erschienen am 21.08.2026. Verfasst von Bingyun Jiang und 5 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Gefördert von: Government of Jiangsu Province.
Abstract (Originalsprache)
As electric vehicle battery capacity and charging rates increase, the heat dissipation challenges of charging piles have intensified. Different from adjusting the parameters of the device itself and cooling equipment, optimizing the air duct structure offers an effective means of thermal management, especially for the charging module located inside the air duct. To characterize the effectiveness of air duct optimization, a heat–flow coupling model is established for a 480-kW charging pile, and the maximum relative error of this model is 3.5%. With three types of objectives considered: temperature, air resistance, and consumables, a finite element simulation method is adapted, calculating 150 sets of raw data, and a proxy model is trained through a multi-layer perceptron. SHERPA, Non-dominated Sorting Genetic Algorithm III (NSGA-III), and Particle Swarm Optimization (PSO) algorithms are used to obtain different optimal designs, respectively. The comparison between these designs indicates that the optimal design is fan down = 171.4 mm, behand move = 5.3 mm, and front move = 33.4 mm. Compared with the original design, the total air intake volume increases by 10.28%, the maximum decrease in air resistance is 36.9%, and the maximum decrease in the average temperature rise of the module is 13.57%.
Förderung
- Government of Jiangsu Province
Zitieren
APA
Jiang, B., Zhou, Q., Liu, Z., Liu, H., Hu, P., & Lu, F. (2026). Air Duct Design and Heat Dissipation Optimization for a 480-kW Charging Pile. Journal of Thermal Science and Engineering Applications, 18(10). https://doi.org/10.1115/1.4071794
Vancouver
Jiang B, Zhou Q, Liu Z, Liu H, Hu P, Lu F. Air Duct Design and Heat Dissipation Optimization for a 480-kW Charging Pile. Journal of Thermal Science and Engineering Applications. 2026;18(10). doi:10.1115/1.4071794
BibTeX
@article{Jiang2026,
author = {Jiang, Bingyun and Zhou, Qi and Liu, Zhenyu and Liu, Hui and Hu, Peng and Lu, Feifei},
title = {Air Duct Design and Heat Dissipation Optimization for a 480-kW Charging Pile},
journal = {Journal of Thermal Science and Engineering Applications},
year = {2026},
volume = {18},
number = {10},
doi = {10.1115/1.4071794}
}
EUVIMED