Multiphase Modeling and Machine Learning Analysis of Void Formation in Chip-to-Wafer Underfill Encapsulation
Journal of Electronic Packaging · 01.06.2026 · 148 (3)
DOI: 10.1115/1.4071771 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Electronic Packaging, online erschienen am 27.07.2026. Verfasst von Rilwan Kayode Apalowo und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 34 Literaturangaben.
Abstract (Originalsprache)
This study investigated void formation during capillary underfill (CUF) encapsulation in chip-to-wafer (C2W) assemblies using multiphase finite volume method (FVM) simulations and machine learning (ML) analysis. A three-dimensional volume-of-fluid (VOF)–based multiphase model was developed to capture the transient, capillary-driven flow of a shear-thinning epoxy underfill within the C2W ball grid array (BGA) architecture. The numerical framework was validated against transparent-model flow visualization experiments, showing close agreement in flow morphology and filling time, with a maximum deviation of 6%, thereby confirming the predictive reliability of the model. Parametric investigations revealed that dispensing pattern was the dominant factor governing void formation, with I-type dispensing achieving approximately 71% reduction in average void content compared to L-type dispensing. Double-dispensing strategies further improved filling uniformity, with the 50–50 split ratio yielding the lowest void percentage, while BGA array density exhibited a secondary influence, as the denser 17 × 17 array produced slightly higher void formation than the 10 × 10 configuration due to increased flow resistance. ML-based prediction demonstrated that a response surface methodology (RSM)-style linear regression model achieved the lowest root mean squared error (RMSE) and highest R2, providing robust and interpretable prediction of void formation. The findings offer practical, data-driven guidelines for optimizing C2W underfill dispensing strategies to minimize void formation and enhance packaging reliability.
Zitieren
APA
Apalowo, R. K., Abas, A., Nashrudin, M. N., Azahari, T., Abdullah, M. Z., & Aziz, M. S. A. (2026). Multiphase Modeling and Machine Learning Analysis of Void Formation in Chip-to-Wafer Underfill Encapsulation. Journal of Electronic Packaging, 148(3). https://doi.org/10.1115/1.4071771
Vancouver
Apalowo RK, Abas A, Nashrudin MN, Azahari T, Abdullah MZ, Aziz MSA. Multiphase Modeling and Machine Learning Analysis of Void Formation in Chip-to-Wafer Underfill Encapsulation. Journal of Electronic Packaging. 2026;148(3). doi:10.1115/1.4071771
BibTeX
@article{Apalowo2026,
author = {Apalowo, Rilwan Kayode and Abas, Aizat and Nashrudin, Muhammad Naqib and Azahari, Taufik and Abdullah, Mohd Zulkifly and Aziz, Mohd Sharizal Abdul},
title = {Multiphase Modeling and Machine Learning Analysis of Void Formation in Chip-to-Wafer Underfill Encapsulation},
journal = {Journal of Electronic Packaging},
year = {2026},
volume = {148},
number = {3},
doi = {10.1115/1.4071771}
}
EUVIMED