Methanol (M15)-Fueled Bharat Stage-VI Emission Compliant High-Speed Port Fuel Injected Spark Ignition Engine: Part 1—Engine Performance, Combustion, Regulated Emissions Under Wide Open Throttle Conditions, and Unregulated Emissions Under High Idling
ASME Open Journal of Engineering · 01.01.2026 · 5
DOI: 10.1115/1.4071719 ↗Kurz gefasst
Fachartikel in der Zeitschrift ASME Open Journal of Engineering, online erschienen am 28.07.2026. Verfasst von Hardikk Valera und 1 weiteren Autor:innen. Die Arbeit nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Methanol has attracted the attention of policymakers and researchers looking for a variety of electro-fuels (E-Fuels) to displace conventional fuels. Vehicle manufacturers have assessed the technical feasibility of operating methanol-fueled engines with minor modifications. This investigation evaluated a port-fuel-injected spark ignition engine with M15 (15% v/v Methanol, 3% v/v Isopropyl alcohol, and 82% v/v Gasoline). A comparative analysis of engine performance, combustion, and raw engine emissions was performed for M0 and M15 in a modern Bharat Stage-VI (BS-VI) emission-compliant engine. Experimental results revealed that the overall in-cylinder pressure of M15 improved compared to M0. Also, the heat release rate and the rate of pressure rise were comparable to those of M0. The crank angle positions at which the maximum in-cylinder pressure, rate of pressure rise, and heat release rate occurred were similar for M15 with respect to M0 across all test speeds. The start of combustion and combustion phasing showed mixed trends, i.e., advanced or retarded, depending on engine speed. Combustion duration extended for M15 fueling vis-à-vis M0. Exhaust gas temperature showed a random trend for M15 compared to M0. M15 exhibited a higher brake thermal efficiency than M0. The M15-fueled engine emitted lower hydrocarbon emissions than the M0 engine. Carbon monoxide decreased for M15 vis-à-vis baseline gasoline. Nitric oxide decreased and increased during low-medium and high engine speeds, respectively, for M15 with respect to M0. M15 emitted higher formaldehyde, isocyanic acid, and 1,3-butadiene than M0. Other unregulated species, such as propene, ethylene, acetylene, benzene, toluene, ethane, and methane, showed a mixed trend for M15 compared to M0. The M15-fueled engine emitted concentrations of sulfur dioxide similar to those of M0.
Zitieren
APA
Valera, H., & Agarwal, A. K. (2026). Methanol (M15)-Fueled Bharat Stage-VI Emission Compliant High-Speed Port Fuel Injected Spark Ignition Engine: Part 1—Engine Performance, Combustion, Regulated Emissions Under Wide Open Throttle Conditions, and Unregulated Emissions Under High Idling. ASME Open Journal of Engineering, 5. https://doi.org/10.1115/1.4071719
Vancouver
Valera H, Agarwal AK. Methanol (M15)-Fueled Bharat Stage-VI Emission Compliant High-Speed Port Fuel Injected Spark Ignition Engine: Part 1—Engine Performance, Combustion, Regulated Emissions Under Wide Open Throttle Conditions, and Unregulated Emissions Under High Idling. ASME Open Journal of Engineering. 2026;5. doi:10.1115/1.4071719
BibTeX
@article{Valera2026,
author = {Valera, Hardikk and Agarwal, Avinash Kumar},
title = {Methanol (M15)-Fueled Bharat Stage-VI Emission Compliant High-Speed Port Fuel Injected Spark Ignition Engine: Part 1—Engine Performance, Combustion, Regulated Emissions Under Wide Open Throttle Conditions, and Unregulated Emissions Under High Idling},
journal = {ASME Open Journal of Engineering},
year = {2026},
volume = {5},
doi = {10.1115/1.4071719}
}
EUVIMED