TRIZ-Based Design Improvement for Facilitating Transmission Control Unit Remanufacturing
Journal of Mechanical Design · 01.07.2026 · 148 (7)
DOI: 10.1115/1.4071592 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Mechanical Design, online erschienen am 27.04.2026. Verfasst von Elif Elçin Günay und 7 weiteren Autor:innen. Die Arbeit nennt 23 Literaturangaben. Gefördert von: Office of Energy Efficiency and Renewable Energy.
Abstract (Originalsprache)
Design for remanufacturing (DfRem) centers on enhancing product design and operations to facilitate remanufacturing while increasing both economic and environmental sustainability. Among many critical steps in remanufacturing, disassembly is essential because it directly supports remanufacturing by the separation of product components for cleaning, inspection, and other subsequent process steps. This study proposes a TRIZ-based framework to improve product design for disassembly in support of remanufacturing. The framework is applied to a transmission control unit (TCU) case study. The current TCU design prevents remanufacturing due to the sealant-based component joinery, which complicates disassembly and risks damaging the printed circuit board (PCB). After defining technical contradictions for the TCU product design and reviewing the suggested TRIZ principles to solve the conflicts, a cantilever snap-fit design alternative is developed. The economic feasibility of the snap-fit design is assessed by comparing the current and snap-fit design costs for three life cycles. The cost analysis demonstrates that the cost of the snap-fit design remains the same as the current design. Additionally, the snap-fit design offers substantial cost savings for three life cycles compared to the current design.
Förderung
- Office of Energy Efficiency and Renewable Energy
Zitieren
APA
Günay, E. E., Ramadani, R., Mundiwala, M., Kashef, A., Ma, J., Hu, C., Kremer, P., & Kremer, G. O. (2026). TRIZ-Based Design Improvement for Facilitating Transmission Control Unit Remanufacturing. Journal of Mechanical Design, 148(7). https://doi.org/10.1115/1.4071592
Vancouver
Günay EE, Ramadani R, Mundiwala M, Kashef A, Ma J, Hu C, et al. TRIZ-Based Design Improvement for Facilitating Transmission Control Unit Remanufacturing. Journal of Mechanical Design. 2026;148(7). doi:10.1115/1.4071592
BibTeX
@article{Gnay2026,
author = {Günay, Elif Elçin and Ramadani, Riad and Mundiwala, Mohammad and Kashef, Amirarash and Ma, Junfeng and Hu, Chao and Kremer, Paul and Kremer, Gül Okudan},
title = {TRIZ-Based Design Improvement for Facilitating Transmission Control Unit Remanufacturing},
journal = {Journal of Mechanical Design},
year = {2026},
volume = {148},
number = {7},
doi = {10.1115/1.4071592}
}
EUVIMED